F
Fast Fords
Guest
What is the stock compression for a 93 Automatic? I've heard it is 9.3:1
------------------
1993 FORD SHO
------------------
1993 FORD SHO
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
S
SHO bulley
Guest
i believe you are correct...
------------------
1991 SHO PLUS,SHOshop K&N cold air snorkel, SHOshop LPM, SHOshop Cat back with edelbrock mufflers, Pirelli P6000 Sport velace, 8 speaker JBL system,LONG WISH LIST:
73mm Vortech MAF, Y pipe w/catz, underdrive pullies, paint job and chromed slicers. "5 liter eater"
------------------
1991 SHO PLUS,SHOshop K&N cold air snorkel, SHOshop LPM, SHOshop Cat back with edelbrock mufflers, Pirelli P6000 Sport velace, 8 speaker JBL system,LONG WISH LIST:
73mm Vortech MAF, Y pipe w/catz, underdrive pullies, paint job and chromed slicers. "5 liter eater"
smokesho
New Member
that sounds about right....
fredhurderjr
New Member
Really? I was told all of the stock 3.0L & 3.2L engines were 9.8:1. Hmm. Anyone know for sure?
94shoboy
New Member
i was told the same as fred. was the 3.2 built with different compression then the 3.0? that mean we can run more boost then the MTX guys?
that would finally be one benefit of owning my car.
sdpatt
Sr. SHO Engr.
According to Car & Driver magazine in their December 1988 issue, the compression ratio for the 3.0L SHO engine was/is 9.8:1.
------------------
Scott
1991, 253K miles, glass hood, police grill, SVO shifter, Catz fogs,
K&N, 73mm MAF, Superchip, PP Y-pipe, Borla cat-back, 190 lph pump
Eibach/Tokico/polyurethane, SHO Shop front & rear strut braces,
16x7.5" Moda R1, 225/55ZR16 Bridgestone RE730, -1 deg camber x 4,
Class II hitch, Silver award at the SHOklahoma Car Show
------------------
Scott
1991, 253K miles, glass hood, police grill, SVO shifter, Catz fogs,
K&N, 73mm MAF, Superchip, PP Y-pipe, Borla cat-back, 190 lph pump
Eibach/Tokico/polyurethane, SHO Shop front & rear strut braces,
16x7.5" Moda R1, 225/55ZR16 Bridgestone RE730, -1 deg camber x 4,
Class II hitch, Silver award at the SHOklahoma Car Show
RJ-92
Active Member
The 3.0 is definately 9.8 acording to quite a few source but about the 3.2 ATX, for no particular reason I thought it was the same but I'm not sure at all.
------------------
Ron Wazz
Red 92 MTX 109K
ss y-pipe,
dynomax cat-back w/1 superturbo & 1 ultra-flo muffler,
street/strip clutch,
18Lb. fly wheel,
ss tq limiters,
bored out MAF,
UDPs, ported intake
Konis and Eibachs, 26mm RSB
In storage for the winter
------------------
Ron Wazz
Red 92 MTX 109K
ss y-pipe,
dynomax cat-back w/1 superturbo & 1 ultra-flo muffler,
street/strip clutch,
18Lb. fly wheel,
ss tq limiters,
bored out MAF,
UDPs, ported intake
Konis and Eibachs, 26mm RSB
In storage for the winter
F
Fast Fords
Guest
Wow, thats a big difference. 9.3 and 9.8, so now I'm not sure whats right. Anyone have a 95 issue of car and driver? I know they have it in there on the ATX. Please let me know.
------------------
1993 FORD SHO
------------------
1993 FORD SHO
CR is the same 9.8/1 on all year and size V6 SHO's.
Similar threads
