Ogmari066
Member
Anyone else have problems with downpipes hitting the ground after slightly steep bump or pothole with H&R lowering springs or is it just me
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Even with my stock suspension before my incident. Just going up and down Kentucky driveways, I could hear the scraping, terrible sound to hear from something that cost $1,400 at the time, I have empathy for you.Anyone else have problems with downpipes hitting the ground after slightly steep bump or pothole with H&R lowering springs or is it just me
Sent from my iPhone using Tapatalk
Lowered on BC coils and PPE downpipes. The lowest part of my car are the downpipes. They're ridiculously low. PPE sent me an email back that they had a bad batch made and I was probably one of them because they pull my hangers. Surprisingly never hit much, hit a pothole at a target parking lot which dented the front and also snagged the clamp on a dirt road.
I got them from ebay before they started cracking down. About $25 a piece. You can find them on aliexpress about $17 shipped but of course you're going to be waiting a while. They worked fine for a full month of long distance driving and then one rattled loose and once I fixed that it was good again. Then my PTU went and after repair I get occasional p013a. Couldn't figure it out, something probably got damaged. Looks like yours are around the same height as mine, thought I was the only one. I wanted to lower the front a bit more but these things are already so close to the ground.Where did you get those defoulers
Sent from my iPhone using Tapatalk