braking problem still there

[95IVSHO]

1995 ATX SHO

problem- car pulls slightly to the right and the brakes are dragging.

we have been through this thing, but we are stumped and just started parts replacing.

new calipers, hoses, pads, rotors, master cylinder, and all new fluid. and have bled them a couple of times. car still drags and im ****** stumped on this one. NEED HELP

 

['94SHO]

Check to see if your REAR brakes are operating correctly.. You have replaced the whole front brake assembly it seems. Try switching your front rotors.
You are aware the pads are not identical? The thicker pad goes on the outside.
(I think..) If the front is all new and bled correctly, that would lead me to inspect the rears for proper operation/ in spec.

 

[St Louis SHO]

Bleed the abs pump, if it works, there is probably a valve hanging up in it. Been there done that on the 94 I just sold.

James

 

[95IVSHO]

well i went ahead and took it to a dealer who im friends with all the mechanics and my father runs the shop. and we had the best tech in the shop look it over for a day, and he is as stumped as i, and ive never seen him stumped before. the rears are operating properly, but the fronts are hangin up still.