Bolt Size Needed (still)

[DougLee25]

Does anyone happen to know the bolt size for the battery tray? I lost one last night in the dark while working, and I thought I'd pick another one up on the way home from work. Thanks for your time.

Doug

<small>[ January 06, 2004, 02:44 PM: Message edited by: DougLee25 ]</small>

 

[Bizzy]

which bolt? There is the one the holds down the tray to the flat horizontal part of the fender, then there are the 2 that are down near the pulleys that are verticle.

 

[DougLee25]

The two that are vertical by the pulleys. I believe all three are the same. Anyone know the size?

Edit: The bolts by the pulleys appear to be different but the thread size is to be determined. Any help from the peanut gallery?

Doug

<small>[ January 06, 2004, 05:29 PM: Message edited by: DougLee25 ]</small>

 

[DougLee25]

Anyone? shrug

 

[DHMag]

M6x20

<small>[ January 07, 2004, 10:19 AM: Message edited by: DHMag ]</small>

 

[masho95]

Actually the ones by the pulleys are horizontal. You're talking about those that go through the tray into the body right? The ones with a 10mm head?

 

[DougLee25]

masho95:
Actually the ones by the pulleys are horizontal. You're talking about those that go through the tray into the body right? The ones with a 10mm head?

Yes, you are correct, the ones by the pulleys actually go horizontal. Is M6x20 the correct size?

Doug

 

[Ishodu]

DougLee25:

masho95:
Actually the ones by the pulleys are horizontal. You're talking about those that go through the tray into the body right? The ones with a 10mm head?

Yes, you are correct, the ones by the pulleys actually go horizontal. Is M6x20 the correct size?

Doug

I would say M6 with a pitch of 1mm and 20mm long.