BBB's
- Thread starter GEN_1NUT
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
zblackbeast
SHOtarded
I noticed this too
Post in the wanted to buy(WTB) section and see if anybody has a set they want to sell.
What part of Tennessee are you in? Make sure to join SESHO using the link in my sig if you are on facebook. We are have our yearly gathering in Nashville in March.
about a year ago we had some unforseen problems and had to start a new group. if you click the link i have posted here, it will bring you to the new group.
South East SHO - SESHO
also, if you post up in SESHO about the BBBs you might find someone nearby with a spare set.
We will be making some more BBB's in the near future, we had run out.
Updated the ad: SHO Source
jayro
SHO Member
Another option is to have yours machined......that's the route I went. Went by all the local machine shops til I found one that would bore them out at a reasonable price. Then 40mm carb plates. Had to modify the shaft and the plates slightly, but it worked well. People have also used the stock plates. While this is not optimal due to air leaking around them, it will work. With the stock plates you can grind the stop down some so get a little closer to closing.
All in all I saved a few bucks (but not alot). I just like doing things myself to learn about it. While you are at it you can always P+P the runners and gasket match the intake to the heads. Wear a mask while doing this though.....Aluminium dust it's good for you.
All in all I saved a few bucks (but not alot). I just like doing things myself to learn about it. While you are at it you can always P+P the runners and gasket match the intake to the heads. Wear a mask while doing this though.....Aluminium dust it's good for you.
Last edited:
Similar threads
