Axle help please!

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

shogansta

Change Username
Joined
Jan 29, 2004
Messages
602
Reaction score
114
Location
Istanbul Turkey.
okay im trying to get the passanger side axle off. well i got one end of the axle off the spindle part now i have to remove it from the intermdiate shaft or axle what ever they call it but i dont know how! i heard that you need to like get a big screw driver and push it out but where do i push from??! anyhelp would be aperciacted! thank you!
 

93rev2sev

SHO Member
Joined
Nov 1, 2004
Messages
6,461
Reaction score
1,825
Location
Hockeytown
Put the tire iron between the CV housing and the case and pry quickly or hit the prybar handle to pop it out.
 

sdpatt

Sr. SHO Engr.
Joined
Dec 6, 2000
Messages
9,670
Reaction score
383
Location
Dallas, TX
shogansta said:
i was told i should go under the car and pop it out from under it!

That's what I do - with an 18" pry bar whose tip is up on the bracket under the power steering pump (IIRC) and the shaft pushing against the inboard side of the inboard CV joint. A quick pop should loosen the C-clip. Be careful not to put too much lateral force on the intermediate shaft's carrier bearing.
 

Forum statistics

Threads
107,077
Messages
1,181,195
Members
16,142
Latest member
Kaevorlly

Members online

No members online now.
Back
Top