Another Flowmater Q, how is the interior noise??

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

SHOntell

New Member
Joined
Apr 17, 2001
Messages
346
Reaction score
0
Location
**** Rapids, MN US
I would like to know the interior noise level with these muffs, is it very noticable, moderate or not much at all? I would like to hear it but not to much. At times I will have my family in the car for trips and I don't want it to keep my 2 year old awake the whole time or wake him up when I accelerate.
Furthermore, will the exhaust tone with these muffs be good enough if I keep the resonator on, or do I need to remove it to get the whole effect?
I want sound from my car, I just don't want it too keep my son from sleeping etc.

------------------
1997 Ebony Satin
K&N Open cone filter
Colgan SHO Bra
6x9 Nakamichi sub, 5x7 Bostons in rear running on an Alpine V-Power amp and 5x7 Kenwoods in doors
 

SHOntell

New Member
Joined
Apr 17, 2001
Messages
346
Reaction score
0
Location
**** Rapids, MN US
Someone please let me know, I need to know if 40 series muffs are going to be too loud for my son to handle in the car. I have an open cone and from what I understand,that is louder than Bullet straight flow muffs when the secondaries kick in. Please let me know. I am in a bidding war on Ebay!!

Mike G
 
J

Jay97SHO

Guest
If you don't want it tooo loud,just have the Flows installed,and leave the resonator inm place. Without the res.,the car is a bit louder inside. As to how loud it is in the backseat,I've never ridden in the back of my OWN car
smile.gif





------------------
hwafh.gif

Jason T.
1997 SHO
V8 power,baby!
73,000 miles(parked for the winter)
White/gray leather
Large,White 7"x12" SHO letters across Windshield
Roush Racing springs waiting to be installed in the spring
Flowmaster 40's/No resonator,and 3.5" slash-cut chrome tips
K&N panel with no sax
otherwise pretty much stock
AIM name:Jay97SHO
NESHOC member
jasont01.jpg

And,now the proud owner of ANOTHER Mocha '91!
Can't wait to get this one driving!It finally RUNS!!!
jasont03.jpg

Ex: 1991 SHO
Mocha with black leather,DynoMax cat-back,no resonator,and K&N panel
 

SHOntell

New Member
Joined
Apr 17, 2001
Messages
346
Reaction score
0
Location
**** Rapids, MN US
Thanks, I am guessing it cant be that bad, let me know if you decide to sit inback with the car on and how it sounds, I think I will just get them and say the **** with it
biggrin.gif
 

OzzmanNT

New Member
Joined
Apr 28, 2001
Messages
317
Reaction score
14
Location
Dinwiddie, VA

SCOTTDW

New Member
Joined
Feb 26, 2001
Messages
305
Reaction score
0
Location
Memphis, TN, USA
SHOntell, a great **** for the SHO is the Magnaflow that I run... Your babies will sleep because there is no drone. It registers betwen OEM and Flowmaster..See Magnaflow.com.
Scott
98SF
K&N Panel
Magnaflows 3"tips
BFGoodrich KDWS
 

SHOntell

New Member
Joined
Apr 17, 2001
Messages
346
Reaction score
0
Location
**** Rapids, MN US
lol, thanks, I'll check it out. I chose not to go with the flowmasters. Is there a particular Magnaflow muffler/part number I should be aware of? Let me know,

Thanks,
Mike
 

SCOTTDW

New Member
Joined
Feb 26, 2001
Messages
305
Reaction score
0
Location
Memphis, TN, USA
I have the 11235 ...2.25 Inlet/Outlet aluminized steel. Shepherd Mims on the V8 site has some other type that he runs. Course he has 4 Japanese racing tips to push the exhaust through

Scott
98SF
K&N Panel
Magnaflows 3 "tips
BFGoodrich KDWS.
 

Forum statistics

Threads
107,088
Messages
1,181,315
Members
16,153
Latest member
lapochkarr

Members online

Back
Top