Airaid + 3 bar map + 100 octane

[WojoMojo]

Getting a few more goodies today and retuning my 2010 taurus sho.. Gonna possibly go get it dyno'd this weekend if not next weekend. Pretty excited. Gonna try squeeze in some data logging before I get on the dyno so Torrie can adjust and see if there's any more power to be made.

Gonna run this setup:

100 octane tune from Torrie @ unleashed tuning
3 bar map sensor
Airaid cold air intake
SP534 plugs gapped to .030
3rd cat+res delete + straight through mufflers (magnaflow x pipe+dynomax mufflers)

Hoping to see 380 to the wheels and not sure what torque. Guess I'd be happy with anything over 350hp to the wheels. Next on the install list is possibly some catted downpipes!

 

[SHOdded]

Good luck! Hope to see those dyno charts

 

[WojoMojo]

First off I want to say how amazed I am with Torrie over at unleashed tuning. We worked together to come up with a perfect tune for my car. Even at 10pm on a Friday night I gave him some datalogs and he sent me a new tune to try that night. Insane service. The dyno guy was amazed at how smooth the tune was and with the AFR being perfect throughout the pull. He's never seen a better mail order tune before.

On a new mustang dynamometer (yes it reads a lot lower than a dynojet, 15% on average) I ran 344hp and 375 torque to the wheels on 16 pounds of boost.

Here is the pull on youtube
https://www.youtube.com/watch?v=ZUJ5evSo3fk

 

[SHOdded]

Not shabby at all!

 

[EcoPowerParts]

Get that car to the track! I gained over .5 in the 1/4 going to 100 octane with Torrie

 

[WojoMojo]

Ha the one day I was gonna take it to the track I was on my way and it got rained out... Closest track is 4 hours away... Perks of living in the middle of nowhere!

 

[rcryniak]

Get that car to the track! I gained over .5 in the 1/4 going to 100 octane with Torrie

Wooooahhh... VERY nice! :woo-hoo: