quake
Member
What pin or what wire do you use for data
logging afr.
logging afr.
Afr wireing
- Thread starter quake
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
shomethe$$$
SHO Member
EGR return wire pin #27 (brn-lt/grn)
this may help you for the DBF
http://eectuning.org/forums/viewtopic.php?p=32155&sid=7b32e9e81111bbf1bee91184a1eb777a
from lesson's learned most of the WB's I used for my setup, read about 5.04volts, with KEY ON, so make sure your DBF file doesn't stop at 5.000.
this may help you for the DBF
http://eectuning.org/forums/viewtopic.php?p=32155&sid=7b32e9e81111bbf1bee91184a1eb777a
from lesson's learned most of the WB's I used for my setup, read about 5.04volts, with KEY ON, so make sure your DBF file doesn't stop at 5.000.
Last edited:
Similar threads
