Adjustable endlinks?

[Shoemjay]

Hey guys looking for adjustable endlinks that are in a fair price range. Found Mustang ones like this
http://www.freedomracing.com/stalli...-car-adjustable-front-sway-bar-end-links.html
Or
http://m.uprproducts.com/mustang-billet-sway-bar-end-links-front-05-satin.html
OR build them from midwestcontrol.com.

I think if I buy these pre-made i might have to drill sway bar and strut hole slightly bigger. But looks to be all the same.
Would this work?
I want to build the rear but that's a little different back there.
Thanks !

 

[sperold]

People have adapted some years of Pontiac (GP?) with success, and you can always put a request on this forum for used / surplus ones.
This "cars for sale" ad has a dropbox attachement in post 1(pictures 45 to 50) that show a successful installation.
http://www.shoforum.com/index.php?threads/93-red-atx-140k-miles-san-francisco-3k.133386/

 

[LOUDSHO92]

We carry adjustable endlinks: http://www.shosource.com/catalog/product_info.php?cPath=61_3_37&products_id=16
http://www.shosource.com/catalog/product_info.php?cPath=61_3_37&products_id=16
We also include them with the coilovers.

 

[Irish Pride]

People have adapted some years of Pontiac (GP?) with success, and you can always put a request on this forum for used / surplus ones.
This "cars for sale" ad has a dropbox attachement in post 1(pictures 45 to 50) that show a successful installation.
http://www.shoforum.com/index.php?threads/93-red-atx-140k-miles-san-francisco-3k.133386/

Those are Ingalls adjustable control arms. He's looking for Endlinks. As far as I know, SHO Source is the only place offering them for the SHO platform.

 

[black92]

Those are Ingalls adjustable control arms. He's looking for Endlinks. As far as I know, SHO Source is the only place offering them for the SHO platform.

It does have adjustable front end links, take a second look

 

[Irish Pride]

Ok, I just looked at pics 45-50 as suggested.

 

[AREA 91]

I had them on my 91+ with coil overs. They made all kinds of noise when turning, very loud creaking and snapping. I took them off and went back to moogs.

 

[Shoemjay]

Thanks response .
So with the lowering Springs(1.5in in front) you can run stock moogs? Thought had get adjustable .

 

[black92]

You can run stock style end links.

 

[Shoemjay]

Great .
Even if I cut dead coil on front, so maybe 2inch drop, will the stock end links prematurely break?
I always thought if lowered any car that end links would bind up not give you a good feel behind the wheel if they were not adjusted. Which stock ones can't so.
But saves me money just wanted to get it right.
Thanks

 

[black92]

Adj. endlink are nice for lowered cars but not required.

 

[TimboSHO]

Great .
Even if I cut dead coil on front, so maybe 2inch drop, will the stock end links prematurely break?
I always thought if lowered any car that end links would bind up not give you a good feel behind the wheel if they were not adjusted. Which stock ones can't so.
But saves me money just wanted to get it right.
Thanks

The endlink attaches at the strut housing which isn't affected by how the springs sits. As long as you are using stock strut housings, stock endlinks will be fine.