Addco Performance Sway Bar??

[pitcrew207]

anybody every seen this or have one?? id like to hear some feedback on it
http://store.summitracing.com/partdetail.asp?autofilter=1&part=ACO%2D409G&N=700+4294908331+4294907826+4294924760+4294925130+115&autoview=sku
http://store.summitracing.com/partdetail.asp?autofilter=1&part=ACO%2D502&N=700+4294908331+4294907826+4294924760+4294925130+115&autoview=sku

 

[hawkeye18]

Don't see why it wouldn't work. 7/8" is like 24mm IIRC. If it fits a taurus, suspension-wise, it fits a SHO. I'd get a 1" bar personally but a 7/8" should work fine. I know Addco, and I know they make good parts.

FWIW, you could probably find one cheaper out of a junkyard '89. Finish wouldn't be as good, but you can't see it...

 

[St Louis SHO]

Hawkeye is correct 7/8 is 24mm. He is also correct in saying a used var is cheaper. Do a quick search to see what sway bar will do you the best as to how you drive your car!

James

 

[Racer X]

Unless there's a difference in how sway bars are measured, 7/8" is 22.2mm

 

[hawkeye18]

doesn't 1" = 25.4mm? damn, I can't remember this grade school crap any more. I'm not used to dealing in standard terms! Damned Americans.

 

[Ishodu]

Yep 1" is 25.4mm. 7/8" is indeed 22.2mm. It wouldn't be a bad size, I am thinking of lowering my 26mm bar down a bit as well.

 

[St Louis SHO]

My bad, yo.

 

[hawkeye18]

why would you wanna go down from 26mm? It's fun having the ass end slide out all the time!

 

[LOUDSHO92]

Be careful with the front ones there are 2 different types. One fits in the stock place and the other bolts under the subframe.