94 ford sho 3.2 auto w overdrive

[robert wheeler]

He guy my names Robert just got me a 94 ford sho 133k miles nice car run and drives great but it shuts down out of no were and losing spark does not really need to be hot to do this but 15 min later fire up runs rev no miss but then repeats it self not crank senor or coil pack just got new think ICM maybe nexe any help plz ty

 

[sperold]

Could be water pump leak on your new crank sensor.
Check with a dentist mirror for a leak out the weep hole on the bottom of the snout.

 

[robert wheeler]

Ty I'll check but not losing any antifreeze and never ran hot but no good with this car lol but I want to have a good day in it

 

[robert wheeler]

So wait on Icm when I unplugged the ICM that what the car does that's how it shuts down but I'll check that in the am

 

[rubydist]

typical symptoms of sick crank sensor. be aware it will keep getting worse.

 

[robert wheeler]

typical symptoms of sick crank sensor. be aware it will keep getting worse.

K I'll check make sure ever thing good

 

[robert wheeler]

Ty very much any way to test my sensor make sure its working

 

[luigisho]

Not really. Often they start to degrade and fail periodically and move on to completely dead. Usually while your operating it. You try pulling codes to see what pops up?

 

[robert wheeler]

No codes check engin light come on when the car stalls as soon as I turn key if it stays on I no it will not start and if I turn key and it goes out I know it will start I tread ran codes and it blinked 3 time for v6 and then I did goose test and does nothing after so think coads were cleared my luck
Ty again

 

[robert wheeler]

Might just ship it down the road getting old $$$$%

 

[rubydist]

Please run the "key on, engine off" test. There will be a code if you have stalled the engine. Let us know what it blinks out.

 

[robert wheeler]

Please run the "key on, engine off" test. There will be a code if you have stalled the engine. Let us know what it blinks out.

Howbu do that test??

 

[rubydist]

follow these instructions:

http://www.troublecodes.net/ford/