bmxludwig
New Member
Title says it all, I just need to know if a radiator from a 94 MTX will fit a 93 ATX... Thanks!
2nd Gen MTX and ATX share the same radiator?
- Thread starter bmxludwig
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
clindahl
Member
Sort of. Many aftermarket radiators are the same, they have the transmission cooler in them, but just not used on the MTX. I don't know about the OEM radiator (I doubt it will work), but any aftermarket, check to make sure it has the cooler ports and your good to go 
the4biddendonut
Hurry up meow.
The MTX radiator is missing a mount that the ATX radiator shroud uses for support. It's a very similar radiator and could be rigged to work though.
Eric VerValin
PiMPSKiLLET
I know you can go the other way around. I have a radiator from an auto, plugged the holes for the tranny cooler, and it fit just fine. Not sure about MTX --> ATX tho.
Similar threads
