2nd gen 3.2ATX and 3rd gen ATX in maryland........

[James Sciascia]

Hey everyone......I don't know who would be interested in anything, but I found two SHO's located at a local junkyard. The 2nd gen is an automatic with 40,??? miles. I is silver ext. with black leather/cloth interior. It looks good inside ad out except for the front drivers side. 3 of the slicers look in pretty good shape and the front drivers side slicer might be a little scratched. The 3rd gen is also silver with the chrome 5 stars. All of these look in good shape, but the front passengers side could be bent. he damage is in the front pass. side. Both cars look fully intact....motor, interior, ext....etc. But i am not sure if they are going to be cut uo or not. Let me know if you need anything, i will be going back up there tomorrow. I can also find out how much they want for maybe the whole cars. Just thought i could help out, let me know if i can. beer

 

[SHOtimer]

Are the slicers silver, or painted another color. If they are silver, I would appreciate finding the price for one of them, thanx
Doug

 

[James Sciascia]

Yes they are silver, and i will check for you tomorrow. I have a buddy that works there as well so maybe i can get a good deal. beer

 

[haydenm315]

James Sciascia:
Hey everyone......I don't know who would be interested in anything, but I found two SHO's located at a local junkyard. The 2nd gen is an automatic with 40,??? miles. I is silver ext. with black leather/cloth interior. It looks good inside ad out except for the front drivers side. 3 of the slicers look in pretty good shape and the front drivers side slicer might be a little scratched. The 3rd gen is also silver with the chrome 5 stars. All of these look in good shape, but the front passengers side could be bent. he damage is in the front pass. side. Both cars look fully intact....motor, interior, ext....etc. But i am not sure if they are going to be cut uo or not. Let me know if you need anything, i will be going back up there tomorrow. I can also find out how much they want for maybe the whole cars. Just thought i could help out, let me know if i can. beer

hmmm.... I live in md 20 minutes outside of baltimore. I need the wire and sensor for the low oil light. I've got a 3.0mtx. Is this the same with the 3.2atx? I also need a manifold support bracket. I wonder if these are the same as well.

 

[RStalveyARFF]

If you could find out how much they want the Gen III SHO motor for I'd appreciate it, as well as the caliper brackets for it, the subframe, and the rear subframe mounts.

 

[dan's 95 green SHO]

Hey if it is not too late could you see what they want for the transmission. I live in Winnipeg MB and used parts are rare I found a tranny with 130 000k (75 000 miles ?) and the guy wants... well for you guys $2000( american) that is about $4000 canadian which I think is outrageous

 

[NorthernSHO]

That is outrageous...do not pay that for a used tranny. You can have your entire tranny rebuilt with a transgo shift kit for that price. That would be your better route. Hop on over to www.shopower.com and sign up to be a part of the Ontario SHO club list. There are a couple of guys there that just had there transmissions rebuilt in Ontario for around $2,000 cdn.

Brett

dan's 95 green SHO:
Hey if it is not too late could you see what they want for the transmission. I live in Winnipeg MB and used parts are rare I found a tranny with 130 000k (75 000 miles ?) and the guy wants... well for you guys $2000( american) that is about $4000 canadian which I think is outrageous

 

[James Sciascia]

Well guys i have a couple answers....I couldn't get back up there because of the nasty weather in my area. ButI was able to get a couple prices over the phone....III gen motor would go for $2500 and the sub frames and caliper brackets are all nickel and dime stuff that they would price when you go them. The II gen car i looked at with 40,*** miles he said the motor was either no good or not listed yet. He did however say he had a motor with 133,*** miles for $900. I am pretty sure it comes with a warranty. Since the II gen car was no listed he did not have a price on the trans. And for the low oil light sensor he said he can't sell because it is a sensor. But if i go up there i can more than likely work it out if you trust it. Well when the weather gets nice i will go back so just let me know what everyone needs and i will check it out myself. Hope this help you guys.....let me know what i can do. beer

 

[SHOtimer]

Just don't forget about my one slicer...and thanx for all this it is very generous of u... thumbs_u
Doug

 

[haydenm315]

James Sciascia:
Well guys i have a couple answers....I couldn't get back up there because of the nasty weather in my area. ButI was able to get a couple prices over the phone....III gen motor would go for $2500 and the sub frames and caliper brackets are all nickel and dime stuff that they would price when you go them. The II gen car i looked at with 40,*** miles he said the motor was either no good or not listed yet. He did however say he had a motor with 133,*** miles for $900. I am pretty sure it comes with a warranty. Since the II gen car was no listed he did not have a price on the trans. And for the low oil light sensor he said he can't sell because it is a sensor. But if i go up there i can more than likely work it out if you trust it. Well when the weather gets nice i will go back so just let me know what everyone needs and i will check it out myself. Hope this help you guys.....let me know what i can do. beer

If you have the opportunity to snag it that would be cool. I suspect it's another discontinued item but haven't really searched for it yet. I check my oil on a daily basis but get annoyed when I don't see the light upon startup so I trust anything that will show me that light. I ripped the cluster out and checked the bulb when I was replacing my a/c control unit. It's either the wire, the sensor or both. That's a pretty good sum for a motor. A good deal is around five hundred for a motor with 70-100k on it.

<small>[ December 12, 2002, 01:12 AM: Message edited by: haydenm315 ]</small>