2012 vs 2013

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Wsho

SHO Member
Joined
Nov 26, 2017
Messages
700
Reaction score
1,275
Location
Sacramento California
To all that own a 2013 and up. Has anybody taken apart their Dash bezel for any reason. The question I'm asking is does the bezel come with the air vents pre-molded to the bezel or is it two separate pieces?20191120 161135
 

Johnbigdog

SHO Member
Joined
Feb 17, 2017
Messages
1,417
Reaction score
1,703
Location
michigain
The fcim (the hvac and radio controls) is part of the center vents. You have to pop the cluster bezel out, and the trim cover above the glove box as well as the two mouldings that the start stop and trunck button are attached to to get to the Apim/FDIM and ACM.

This is going by memory.
 

Wsho

SHO Member
Joined
Nov 26, 2017
Messages
700
Reaction score
1,275
Location
Sacramento California
Yeah I know how to take it apart my question is is a 2013 and up different than my 2012. looks like this in the picture. Does a 2013 and up look like this with the vents connected to it.?
Screenshot 2019 11 22 20 14 12 1
 

Jordan_R

Stock Block Ready To Knock...er..Rock
Joined
Sep 20, 2017
Messages
1,774
Reaction score
4,455
Location
Missouri
Yes, they are connected like that except the bottom section has the "touch" climate control panel
 

Wsho

SHO Member
Joined
Nov 26, 2017
Messages
700
Reaction score
1,275
Location
Sacramento California
Yes, they are connected like that except the bottom section has the "touch" climate control panel

All I want to know is if the vents are connected in the newer model.. this is what's replacing my bezel but it doesn't have vents and what I can see I cannot remove my vents and put them on the new bezel so I'm thinking it goes to 2013 and up model 20191119 161704
 

Johnbigdog

SHO Member
Joined
Feb 17, 2017
Messages
1,417
Reaction score
1,703
Location
michigain
So like I said. Yes they are connected

For additional clarification, the events are one piece no matter what modle year you have. The company that sold you your new human machine interface will have to help out with the vents becuase I cant think of a way yo separate them other than going under the knife.
 

Jeff2017

SHO Member
Joined
Jan 29, 2017
Messages
810
Reaction score
516
Here is a you tube video for upgrading SYNC2 to SYNC3 on a 2013+. The vents do appear to be attached.
 

Wsho

SHO Member
Joined
Nov 26, 2017
Messages
700
Reaction score
1,275
Location
Sacramento California
Okay thanks guys now I just got to figure out the wiring situation because nothing plugged in waiting for confirmation from the company.
 

skyshadow07

On a mission to get below 4000lbs
Joined
Nov 15, 2019
Messages
959
Reaction score
925
Location
Oklahoma
Well actually it's about vents. Not a single review, opinion or comment about the device itself.
 

Gary Sawyer

New Member
Joined
May 12, 2019
Messages
5
Reaction score
0
Location
Virginia Beach, Virginia
To all that own a 2013 and up. Has anybody taken apart their Dash bezel for any reason. The question I'm asking is does the bezel come with the air vents pre-molded to the bezel or is it two separate pieces?View attachment 10957
Ok, I just want to know where you got the dash cover with the center speaker cut out. Every one I look at on the net covers the speaker. Thanks, I have a 2014 SHO.
 

Wsho

SHO Member
Joined
Nov 26, 2017
Messages
700
Reaction score
1,275
Location
Sacramento California
Ok, I just want to know where you got the dash cover with the center speaker cut out

Well I ordered the Dash cover and when it came I didn't like it covering the speaker so I customized it myself sent some picture to the company and they like what I did and apparently they were going to reconstruct it but never heard nothing back
 

Forum statistics

Threads
107,077
Messages
1,181,195
Members
16,142
Latest member
Kaevorlly

Members online

No members online now.
Back
Top