4sfed
SHO Member
Excellent! Thanks!
Okay...that's it, I think I'm done with the questions.
Sent from my iPhone using Tapatalk
15 sho non-pp.. h&r spring question.
- Thread starter nnobody825
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Excellent! Thanks!
Okay...that's it, I think I'm done with the questions.
Sent from my iPhone using Tapatalk
4sfed
SHO Member
Yup sorry....one more.
Did it alter his carry capacity? I'd like to take the car on trips and don't want to have to carry less bags because the springs bottom out when loaded with more weight.
Sent from my iPhone using Tapatalk
None what-so-ever! I take wife and 3-year old on trips with suitcases, presents, etc. - but then again I have the PP option with the stronger shocks, etc. Do you have the PP?
I believe Jason had to trim a little plastic to avoid a little minor rubbing.
4sfed
SHO Member
I do not. But shocks aren't necessarily what keep the car off the ground anyway, right? They just dampen the bounce.
Sent from my iPhone using Tapatalk
4sfed
SHO Member
Well, the whole suspension is "stronger," with the PP and sometimes people report a little more "bounce," when installing "lowering springs." But with my PP SHO I didn't notice any ride-quality difference!
I just got the new Camber Bolts 84130 installed this morning and feel much relieved! The Tech said the previous ones, 81280 were still locked in and holding the same since they installed them 3 years ago... but, it's much more assuring that these are the correct ones and ALL the threads are used. The 81280 were a little too short.
