suspension

  1. WarrenBoostit

    Rapid Fire Front End Squeak On H&R Springs Over Bumps

    I've had a mysterious squeak in the car that seems to have decided to announce itself a lot louder and more often after exiting winter. The squeak seems to reveal itself the most when the car is either in a neutral or forward lean (braking), while going over rougher MN roads. With the stiffer...
  2. M

    Can I use grade 5 titanium for strut top-nut?

    Just to get it out of the way - I know it's dumb. I don't want to do it, I'd much rather use stainless. Unfortunately after an hour of searching, I have not found a nylock flanged nut M14-1.50 for sale locally, or on a US-based website. Oh there are lots of them with serrated ****** bottoms, or...
  3. Deathacus

    SHO vs GL/LX suspension

    Hey guys! I Was hoping to get some good insight as to what the differences are for the suspension between the SLO and the SHO. Specifically 1994 I bought a '94 recently that's been slightly mooded, stiff suspension, etc. I want to restore it to stock, but i wanna make sure what i buy is correct...
  4. GEN 3 SHO FAN

    Height sensors going wrong

    I came to the idea that one of the front strut was shut because the front bouncing a bit more than rear (when rolling) and managed badly some rought bumps. I remembered however a story said by a guy just passing beside me when working on the car telling me his father had one and had to replace...
  5. Shadow351

    Strut / Shock Suspension Codes

    I had a toe link failure on my 2010 SHO, so after replacing both toe links I took it in for an alignment and they informed me that my front struts and rear shocks were bad (they lumped all 4 springs in with that 'recommended replacement'). My door sticker reads Suspension "CCGG" so when I...
  6. W

    2018 SHO without the Performance Package. Seeking upgrades

    I recently purchased a 2018 SHO. It does not have the SHO Performance Package. I'd now like to upgrade/retrofit it with brakes and suspension mods, and possibly exhaust and engine tuning at a later date. My Ford dealer won't help, suggested I find a good tuning shop, but would not offer any...
  7. R

    Newbie advice: Camber adjustment?

    im new to the sho life and need some tips. Picked up a 94 mtx with 96k Miles has some new parts on her but I can tell the front and rear both have too much camber. I crawled under it and not sure how to take some out of it? But just not sure on the next step.
  8. P

    ISO 89-95 front tension rods

    Seeking 89-95 front tension rods - the rods that triangulate the lower control arm to the subframe. SHOSource has them for $99 + shipping for a pair. I'm hoping to get a pair for less than that. My only criteria is that the bushing areas cannot be rotted. My current pair has badly rotted...
  9. P

    ISO 2nd gen steering knuckle

    I need the front passenger side steering knuckle for a 95 MTX. I imagine that any 2nd gen MTX or ATX knuckle would be compatible. Does anyone know if the SHO has a unique knuckle or if it's the same as the base Taurus/Sable? Also is the 1st gen steering knuckle the same as the 2nd gen?
  10. SHOMeSomeBoost

    Alignment required after lowering rear?

    I have a 2010 SHO PP AWD. If I lower the rear by about an inch, do I need to get it realigned, or am I good to go?
  11. SHO_girl

    any suggestions?

    I have a 2013 SHO. I am planning on upgrading the intake, does anyone have any suggestions? I am also considering lowering the suspension as well, does anyone have any recommendations and/or photos?

Latest posts

Forum statistics

Threads
106,849
Messages
1,178,647
Members
15,924
Latest member
deaglebingo

Members online

Total: 857 (members: 3, guests: 854)

Share this page

Back
Top