Search results

  1. 9

    Sway Bar Combos

    I run 24/ 20 combo on the bars, with my 95 atx, and a whole new suspenion put in this june, tokico's eibachs. tpr thru out, gtp rear arm, slotted frt stru towers for more negative camber at soloII meets. what I didn't install or havent made is:26mm rear bar, h- brace, sfc, frt or rear strut...
  2. 9

    need pics of h brace and gtp arms

    Im trying to set my car up for scca and I'm try to complete an email with pics, any help is greatly welcomed.
  3. 9

    I can't figure this ABS out!

    you can also ck each sensor with a dvom set on a/c volts. unplug the leads to the wheel sensors and spin the wheel, you should see a positive volt reading and negative volt reading. also ck the leads for abrasion and heat damages, ask netviper about abs and exhuast pipes.
  4. 9

    Will a 97 trans fit in a 98?

    It sucks finding out after the trannys installed
  5. 9

    Overdrive light flashing, HELP

    mercon V, dont use any other grade, and the fill mark is wrong on the dipstick, full is actually on the N of the word dont
  6. 9

    capitol region

    then there's me
  7. 9

    Automatic trans. 93sho

    Yes...... but not easy.These tools are needed if you want to get to the valvebody, you need is an engine cradle, six jack stands, a hydraulic floor jack. and common hand tools. Now the job ahead, install the engine cradle with the cables so that you have plenty of travel to safely lower/guide...
  8. 9

    ATX theory

    The ax4s and ax4n converters are all lockup.the computer varies the rate and percentage of lock up on many variables, like tps angle, load %, gear lever postions, temp, rpm,and many more. If you think your not in lockup try this,after driving your car for a at least 3-5 miles to warm both the...
  9. 9

    rpm rising while not on accelerator

    clean out the idle air motor and ck for codes if any. also as idle air motor get old they hanging up.
  10. 9

    Exhaust Leak or Something?

    332 is dpfe didnt change. search for this code on the forum and 176 is lft o2 sensor not working. but fix the 332 code first before any thing else then erase the codes.
  11. 9

    No TQ Converter Lockup

    you could ck if its lockedup while driving keep you right foot on the gas at cruise at aconstant speed above 45mph. then lightly touch the brake pedal, this should produce arpm increase and unlock the convertor. but wont work it the tranny is cold.
  12. 9

    Oh yay! Another non-running SHO

    does it crank? or have spark do you hear the fuel pump?
  13. 9

    Still having power issues - HAVE CODES

    fix koeo first then erase codes and see if any koeo return, if you need exact code difinitions pm me
  14. 9

    Help me find my lost power

    Is the ircm working? ck the cable for tension. Any codes that might point to any problems, Have u run koeo ?
  15. 9

    ATX 2nd and 3rd gear slips

    why did you install a use unrebuilt trans, thats alot of work to just pull it out again, most ax4s/ax4n are done by 100k and really do need to be gone thru. I'm working thru netviper for atx rebuilds. i can rebuild and update and improve your tranny. I'm also working on a LSD for the auto trannys.
  16. 9

    99 SHO tranny rebuild

    pm sent
  17. 9

    Rotors Warping

    ck for rust on the wheel flange and bearing flange, enough rust in that area it would feel like warpped rotors, just my 2 cents
  18. 9

    Another transmission thread

    How many miles are on the tranny? My 95 does the samething and it just needs to be rebuilt, mine has 147000 + miles on it and it will hunt and jump in and out of gear ranges under load, with isuue of not reaching 7000 rpm is the tranny/in need of a shift kit and ck's to the line pressure.
  19. 9

    tranny knowloedge anyone

    Hi, Don't for get to NOT I say NOT change the spring in the servo cover you can put the metal wire ring in later if the shift isn't what you like "harder" with the wire ring in. It compress the spring more and increases apply speed and pressure,Also get the lube lines most tranny shops will...

Forum statistics

Threads
107,085
Messages
1,181,297
Members
16,152
Latest member
lapochkarr

Members online

Back
Top