Search results

  1. TimboSHO

    95 SHO MTX Green/ Mocha 95k miles

    SOLD! 1995 Taurus SHO 5 speed 95,000 miles PRICE REDUCED! $3500 obo As I am driving it now that the weather is nice, I've noticed a few little things that might need to be addressed. Reduced price and added these in the 'not so good' section. Loaded with options, original window sticker Rebuilt...
  2. TimboSHO

    Gen 1 interior trim

    Looking driver's side a-pillar trim, 90-91 upper steering column shroud and metal knee bolster. Color does not matter, black would be better if possible. Since the a-pillar trim might be impossible to be shipped, looking for something closer to Grand Rapids, MI if possible. Let me know if you...
  3. TimboSHO

    Gen 3 power steering pressure and return lines

    Looking for Gen 3 power steering lines that go to the ZF rack for conversion. Thanks!
  4. TimboSHO

    Relocating Radio Antenna

    My power antenna recently quit working on my 89, and I'd rather get rid of it entirely and route something inside the car for a cleaner look on the fender. Has anyone done this? I've tried a couple of different antennas (tune trapper and an amplified one) and neither of them will pick most of...
  5. TimboSHO

    89 Radio brackets/hardware

    My 89 came without the brackets to hold the radio in. I am in search of the brackets and bolts to hold them in, as I'm finally getting around to putting a working radio in it after all these years. It's been a long time since my last 89, so I can't remember what all is needed either. Hopefully...
  6. TimboSHO

    Gen 3 subframe ball joint boots melted

    Hey all. On my 89 I have the gen 3 subframe with cobra brakes and noticed my ball joint t boots are melted. I don't run backing plates because they wouldn't fit with the 13" rotors. I must have melted the boots at Gingerman a couple of years ago when I discovered running with the fog lights in...
  7. TimboSHO

    Coilovers 101 - UPDATE- articulating mount issue solved!

    I just received my beautiful new SHO source coilovers this week. I am an ASE certified auto mechanic, but I just have a few questions to get me started, and thought I would start a thread for all of the others that are waiting to put these things of beauty on their cars. 1. Should I tighten...
  8. TimboSHO

    Borla exhaust

    Does anyone know how much the borla exhaust system was new? Even better, does anyone have any magazine adds featuring the system for our SHO's (89-95). Is this something that would be in the goody book, or some of the convention magazines? (those are some of the few SHO collectables I don't own!)
  9. TimboSHO

    First In Class

    Joined the Michiana Porche Club yesterday for some autocross at the Tire Rack. Awesome place to go, and not a huge crowd. I ended up 9th out of 24, but first in my class (domestic class with 3 brand new corvettes). As always, it's just fun to surprise some people that an old taurus can do that...
  10. TimboSHO

    Coilovers

    WTB Coilover setup for a Gen 1. Must be the full setup (springs and struts) ready to go. Either ground control/koni or any SHOsource sets out there used? PM me and let me know what you have. Thanks!
  11. TimboSHO

    Rust free 89 in Michigan

    http://grandrapids.craigslist.org/cto/5462305552.html At least that's what they say. Still a pretty good price for a solid 89.
  12. TimboSHO

    Low Mile 95 MTX in Mid Michigan

    http://lansing.craigslist.org/cto/5461023643.html Looks pretty clean for a Michigan car!
  13. TimboSHO

    Found! Thanks!

    No longer need.
  14. TimboSHO

    Modified 1995 Taurus SHO ATX - $1700

    3.2 Liter automatic, 171,000 miles. Up to date on all scheduled maintenance: -Timing belt, water pump, crank position sensor, cam position sensor, serpentine belt, rebuilt alternator, valve cover gaskets, spark plugs and wires, serpentine belt, silicone vacuum lines, rod bearings and oil pan...
  15. TimboSHO

    ABS codes 33 and 37

    I have an ABS light with codes 33 and 37, both for the right rear sensor. I am wondering if anyone knows resistance and AC voltage specs for the sensor so I can test it? And if the sensor tests good, are there other spots in the harness that go bad? Thanks for any help!
  16. TimboSHO

    ATX timing belt tensioner assembly and middle timing cover

    Prefer a good used tensioner with no visible leaks and good tension. Timing cover doesn't need to be perfect, just mostly there. Thanks!
  17. TimboSHO

    12th out of 28 with the SHO

    After having so much fun in the Miata at autocross, I decided to take the SHO! Tons of fun! I made some rookie mistakes in the morning, but really started to get the feel for the car in the afternoon. I think I will be taking the SHO out autocrossing more often! I would have been 11th, but the...
  18. TimboSHO

    Miata Autocross

    Well, I took the plunge onto the Autocross scene. The event was held at the tire rack test track, put on by the Michiana BMW club. I was in a mostly stock 91 Miata with street tires, but stayed ahead of other more powerful cars with stickier tires. I don't have any pictures, or even the...
  19. TimboSHO

    1987 Sable/SHO Wagon *sold*

    1987 Mercury Sable SHO Wagon ‘Hot Rod’ This wagon spent its first few years as a 3.0 Vulcan and automatic transmission. At 60 thousand miles in 1990, it was dismantled, and parts were swapped over from a newly wrecked 1989 Taurus SHO with only 4500 miles. The Ford engineer that undertook this...
  20. TimboSHO

    Tweecer idle issues

    Yes, I know there is a thread that already has this title, but I have different issues. I have a MarkVIII 80mm Maf, 3.2, stage 1 cams, and about every other bolt on. I have the right maf file loaded, changed the idle and the displacement in the scalers. I can't get it to idle correctly. It...

Latest posts

Forum statistics

Threads
107,084
Messages
1,181,288
Members
16,152
Latest member
Satchmoz

Members online

No members online now.
Total: 369 (members: 0, guests: 369)

Share this page

Back
Top