Search results

  1. B

    Using 4.8/5.3/6.0/6.2 LS truck idlers on a 3.2 SHO

    The top idler on 3.2's can be replaced with a 99-13 GM truck 4.8/5.3/6.0/6.2 idler pulley. It's around $30 and it's a whole new assembly. A lot of LS engines regularly see 7000rpm so I don't think RPM will kill it but we'll see. I think the tensioner idler from the same trucks will work on the...
  2. B

    Anyone know what the leanest cylinder is??

    Anyone know which cylinder is the leanest? On an intake manifold,you never have perfect distribution. My guess is it's either 1 or 4..... Thanks in advance.
  3. B

    Throttle Body coolant bypass mod instructions??

    Finishing up a full 60k and I want to do the coolant bypass mod but the 3 hoses has me confused..... I'm thinking loop the large coolant line that feeds the TB with the IAC adaptor coolant output that goes to the thermostat housing and just plug the other one??? If anyone has a schematic,I'd...
  4. B

    WTB: Corbeau seat brackets for 86-95 Taurus

    Just scored a nice set of non reclining Corbeau seats on CL for $100! I see racing-seats.com sells the adjustable double locking brackets for $125 side. Any1 got a set before I buy it new? Thanks, Drew 205-453-2765
  5. B

    WTB:ATX timing belt tensioner or Manual conversion

    Looking for a spare ATX tensioner so I can build it into a manual one. Or one already converted to manual. Thanks!
  6. B

    Where to buy 3.2 ATX manual tensioner and reinforced motor mounts?

    Does any1 know where/who I can get either item from? Looking for a cheaper alternative for the $190 rebuilt 3.2 ATX tensioner....if a rebuilt unit is better than the manual upgrade,I'll go that way....... And I want to go ahead and install reinforced engine mounts since my stock mounts need...
  7. B

    Is there anyone here who actually ran a true dual exhaust?

    I've read all I could about true dual vs single vs dual-single-dual.....which there ain't much on true duals at all....besides Vadim trashing them and Ted B saying his muffler shop special crush bend 2" true dual exhaust kicked ass and made more HP/TQ than any other hi Flo y pipe/cat back combo...
  8. B

    A few questions about o2 sensors, ATX vs MTX sensors,Denso vs ??

    Im needing to replace the o2 sensors and been searching......I've read about most sensors on the cars being Bosch and the o2 sensors on my 95 3.2 ATX car are a 4 wire setup vs 3 wire on the MTX cars..... I'm leaning towards 2 of the Denso 234-4610. I've always had great luck with Denso (they...
  9. B

    WTB: Stock Torque convertor core for 95 ATX

    I'm looking for a torque convertor for a 95 SHO ATX. I think 94-95 are the same,I know 93 is totally different. I'm buying this to have it gone thru by PTC. So as long as nothing is broken on the outside and no stripped splines for the input shaft,I'm interested. It can come out of a...
  10. B

    WTB: stock 3.0/MTX intake cams

    Looking for a set of low mile MTX intake cams if anyone has a set they'd like to get rid of. I prefer low mile but will take any as long as they are in good,ready to run shape. PM or text me! Thanks, Drew 205-453-2765
  11. B

    Need new calipers,are Mustang GT calipers bolt on w/ 96 brake upgrade?

    I just did the 96 brake upgrade to my 95 and the calipers are leaking...... Can I just bolt on the 99-04 Mustang GT calipers/brake pads?? Or does it require modifications to the caliper bracket or ???? Thanks!
  12. B

    WTB: aftermarket performance cams

    looking for a set of performance cams. ShoShop,Shonut,etc. As long as they're in good shape,I'm interested. Thanks!
  13. B

    Anyone looking for 3.0 or 3.2 head gaskets?

    I see that head gaskets are getting tough to find for some.... Call Cometic. They will custom make ANY gasket and have no minimum order. If you have an engine that requires a head gasket,no matter how rare or obscure the application,Cometic has you covered!!
  14. B

    80mm Mark VIII or 90mm Lightning/Cobra maf?

    Just like the title states.... I already have a 80mm Mark 8 maf I picked up some time back but I also have access to a Lightning 90mm maf and I'm wondering which I should use for my bolt on 3.2. I will be using the SCT chip for tuning and I already have the Spectre 8146 maf flange for...
  15. B

    WTB: S1 or S2 Shonut adjustable fuel psi regulator

    Looking for a Stage 1 Shonut adjustable fuel pressure regulator. I would take the Stage 2 for the right price! Thanks!
  16. B

    WTB: 2 slicers w/ caps and fuel rail(will take modified to fit non stock inj's)

    Just as the title states.... Looking for 93-95 Slicers(1 left and 1 right) And a 89-95 fuel rail I can modify for regular injectors. Thanks!
  17. B

    WTB: 93-95 front and rear bumpers,prefer Jewel Green

    Just like the title states,looking for MINT front and rear bumpers,prefer they be Jewel Green so I can clean them up and bolt on my car. Thanks!
  18. B

    WTB:braided SS brake lines,front facia,struts/springs,intake coupler kit

    Just like the title states. Looking for braided brake lines(don't care who's kit but must be in good shape) Struts and springs for all 4 corners. I've been looking at the KYB's struts and Moog springs but I know there are better out there. Used is ok as long as it's in good shape and will...
  19. B

    Spraying dry n2o shot before maf sensor,anyone do it on a SHO?

    Does anyone spray a dry nitrous shot before the maf and allow the ECM to add the extra fuel instead of using the part that tee's into the fp reg?? I know others do this on Mustangs,Camaros,and pretty much anything else with a mass air sensor so I don't see why it wouldn't work?? Anyone...
  20. B

    95GOOSE aka Bill Doten= CLASS ACT!!

    Bought some parts from Bill(40mm BBB's,ported runners,h brace,etc,etc) and not only were the parts as described and shipped fast,he included a "gift"!!!!(60k how to DVD) I highly reccomend Bill!!! In this day and age with shitty sellers and rip off artists,Bill is a class act!! Thanks...

Latest posts

Forum statistics

Threads
107,088
Messages
1,181,315
Members
16,153
Latest member
lapochkarr

Members online

Total: 385 (members: 3, guests: 382)

Share this page

Back
Top