Recent content by 89SilverSHO

  1. 8

    Stalling while running w/ Codes

    Ok i was driving home from work friday and after shifting into second my car started to buck and i lost my tack a second later it came back to life. Like the engine just shut off and then started itself again. It did this intermittently all the way home not always into second but also in third...
  2. 8

    Several Problems PLS HELP... Ne1! :(

    yes i know about the bearings... (fun stuff) no oil on cats just front manifold (eg. spilling oil when refilling) its coming from the bottom side (making an assuption; like squirting out of the block to head area.) the radiator seems to constantly be under pressure even if it just cranks. it...
  3. 8

    Several Problems PLS HELP... Ne1! :(

    Ok to start... White smelly exhaust (headgasket? Just did em) Completely dies or surges after or around 2k RMP With full radiator overflow flows massively on the ground **** coming from bottom right of engine and no codes... I am half tempted to part out my engine and buy a new one. After...
  4. 8

    Head Gaskets

    Ok... been awhile since my last post but.... I finaly got my heads off. First thing i noticed was that the gaskets looked backwards (water holes didnt line up fully on either side((Looked restricted and there was buildup of crud around the holes)) Second I noticed that between 2 of the cylinders...
  5. 8

    Disappearing Coolent and Milky Oil = Head Gasket?

    Thanks SDPATT for the info on doing my shim's. Just started today and noticed when taking off my valve cover gaskets that there covered in a nasty milky jelly. First thought is where is it coming from, so I checked my dipstick and it looks like fresh clean oil checked my radiator and it was...
  6. 8

    Idle fixed, Knock not... But.....

    Thanks ALOT scott for the info looks like i have a new project on my hands... do you know where i would get the new shims? -John
  7. 8

    Idle fixed, Knock not... But.....

    Valve shim... What does a badly worn one look like? Is it easy to replace? Ive looked at them when i did my CPS and Knock but didnt really inspect them closely. Think this has worn down my lobes? How long you think i can get out of those plugs and wires? Ive herd mixed opinions about them...
  8. 8

    Idle fixed, Knock not... But.....

    Perfect way to describe the sound is by hitting a pen against ur desk and holding it from the bottom very hard sound. I also just checked my pullys and other misc. things for tightening. Sound seems to be coming from #2 cylinder using a scope to listen for it.
  9. 8

    Idle fixed, Knock not... But.....

    Ok after buying new Bosch Platnum Plugs and Bosch Wires (besides for being alot lighter in the pants) has fixed my idle problem but not the knock. Seems when in nutral @1000rpm - 2750rpm its a knock BUT from 2.75k and up its a chatter. You can definately tell the difference from the idle sound...
  10. 8

    Sho not idling seems like its surging

    Doug; I bought Boch Platnum Plugs and Wires I dont have a chiltons i have mitchels on-demand :p but it says (Looking at engine Back 1,2,3 front 4,5,6 "Sounds like the camshaft syncronization sensor" Im lost.... CID or Camshaft Position Sensor? That I replaced before that the car would not...
  11. 8

    Sho not idling seems like its surging

    Just put in new plugs, wires and cleaned IAC assembly. Now when trying to start the car all you hear is popping coming out of the intake (backfire) so hard infact it blew my airfilter off (wasnt clamped down but still thats hard) Im am at a total loss... Does anyone know how to fix? Codes: 41...
  12. 8

    Sho not idling seems like its surging

    I FINALY got my SHO to idle/run (YAY! :) ) today and now its Surging starts up on second key turn idles off the bat nicely but like a milisecond later it jumps from 1k to about 1.3k and drops to nearly .5k. What could cause this? Sometimes after it drops down from 1.5k to .5k and then dies i...
  13. 8

    Fuel Injector Problems...

    Well new O-Rings in this time i found that there was a 1/4" gap between the rail O-Ring and the injector spacer w/ the O-Ring kit it comes with 12 0-Rings so I put 2 on each injector and it doesnt seem to be leaking AS MUCH, but it is still leaking, talk about being frustrated. Personaly I think...
  14. 8

    Fuel Injector Problems...

    Well I just bought the new o-rings again so this time i'll put them into the rail first then into the heads i think thats the problem, I was splitting the o-rings before. Hopefuly this time it wont leak. Thanks for the info as always :)
  15. 8

    Fuel Injector Problems...

    I had to take off my intake and fuel rails to replace the knock sensor after reassembly i found a puddle UNDER the car (thought it was a leaking waterpump) after closer inspection i noticed that my fuel injectors were soaked, so i took a trip to autozone and got the replacement O-Rings (garbage...
See more

Latest posts

Forum statistics

Threads
107,080
Messages
1,181,220
Members
16,144
Latest member
14blkbeauty

Members online

Total: 479 (members: 1, guests: 478)

Share this page

Back
Top