Team Dynamics

[pitaSHO]

What offset is common for the PR2's in the SHO 5x108 bolt pattern? Or does anybody have a set available they want to sell?

Thanks.:thankyou:

 

[pitaSHO]

Never mind on the offset. I found it.

 

[ShoStyle]

So, tell us....:sun:

 

[pitaSHO]

The offset I have found in different threads has been a 35mm offset.

 

[92sho16]

that doesnt sound right, my 17x7 pro race 2 rims were 45mm. Wheels for the sho are generally between 40-45 mm offset.

 

[pitaSHO]

Well, I did a forum search because I couldn't find it any where else, and shomesomesho had a set that were a 35mm offset, unless I read the post wrong. Here is the post from which I got that info. Let me know what you think. http://www.shoforum.com/showthread.php?t=65399&highlight=Team+Dynamics+PR2+offset

Thanks.

 

[NotSoSlowSHO]

Quick Google search provided this:

http://eastcoasttires.com/wheelbrands/Team-Dynamics/#a411



:wave:

 

[shomesomesho]

Well, I did a forum search because I couldn't find it any where else, and shomesomesho had a set that were a 35mm offset, unless I read the post wrong. Here is the post from which I got that info. Let me know what you think. http://www.shoforum.com/showthread.php?t=65399&highlight=Team+Dynamics+PR2+offset

Thanks.

They really are 35mm offset. They were special ordered.

 

[SeanMc]

They really are 35mm offset. They were special ordered.

Does that mean you could have fit Cobra R brakes?

 

[92sho16]

Does that mean you could have fit Cobra R brakes?

I dont know about the clearence with the pro race 2's because with 45mm clearence the cobra calipers were pretty close i dont think the extra 10mm would be enough, but the pro race 1 with 40mm offset have the room.

 

[pitaSHO]

They really are 35mm offset. They were special ordered.

I'm curious; why the 35? is it to pull the wheel closer in?

 

[92sho16]

I'm curious; why the 35? is it to pull the wheel closer in?

The lesser the offset the further out of the wheel well the wheel will go.

edit: pic for better explanation

 

[Toolman]

The lesser the offset the further out of the wheel well the wheel will go.

edit: pic for better explanation

Yes, assuming the widths are the same. For example, a +45 offset on an 8" wide wheel vs a +35 on a 6" wide wheel. Even though the 6" wheel has a lesser offset, the 8" wheel will be further out of the wheel well (by almost an inch). Also, they will have different strut clearances. Therein lies the problem with saying 'so and so offset is needed', because it can change some depending on the width of the wheel.

 

[shomesomesho]

I'm curious; why the 35? is it to pull the wheel closer in?

I wanted the wheels/tires to stick out as far as possible.

 

[shomesomesho]

Does that mean you could have fit Cobra R brakes?

The 35mm offset rims cleared the Cobra brakes.

I used to have 17x7 pr2's w/ 45 mm offset and those cleared the Cobra brakes too.

 

[black92]

TD PR1's will fit over Cobra R Brembo calipers with plenty of room left.

 

[92sho16]

Yes, assuming the widths are the same. For example, a +45 offset on an 8" wide wheel vs a +35 on a 6" wide wheel. Even though the 6" wheel has a lesser offset, the 8" wheel will be further out of the wheel well (by almost an inch). Also, they will have different strut clearances. Therein lies the problem with saying 'so and so offset is needed', because it can change some depending on the width of the wheel.

Every time ive thought of wheel offset ive never taken that into consideration, thats good to know. the only time ive thought about different offsets was when i was trying to push my pr2s out of the wheel well more.