sway bars ?

[PROPHET]

what size sway bars in a 92,and what would be best for performance ,would 24mm and 26mm be good?

 

[Mr Anonymous]

According to http://www.panix.com/~awinbow/sho/suspension.html '92s had a 24/23 combo. The only way to know for sure would be to put a caliper on them. Presuming that there is a 23mm rear, it would definitely improve handling to change it to a 26mm.

 

[NotoriusCSR]

read the post called Understeer by me. its like 7 topics down.

 

[PROPHET]

Thanks Notorious. thumbs_u

 

[PROPHET]

Thanks to you too ,SHOooo thumbs_u

 

[SHO5]

i want either a 28 mm or a 26 mm i also have a 92 and want better handling what would the prices be on each of these and which has best overall balance.

 

[SHODWN]

I have a set that are ending today on Ebay, the 24 and 26 set. Most everybody has always used this set for better handeling. I know it made a WORLD of difference on the Gen 3.

I wont/cant post the link here though but they are there on Ebay for a short while longer..

 

[noSHO]

I've always felt 24/26 was only good because at some point someone said it was. It's cheap and easily obtained, but IMO it isn't the best handling combo. It's good for the Automatics as I understand it, but for an MTX SHO it is too much front bar/not enough rear bar. I think 24/28 is probably the most optimal neutral setup. It still understeers when pushed hard, but is neutral otherwise. It's more expensive though, but the more I deal with car stuff in general, the more I find out that you get what you pay for. Take it FWIW.

 

[SHO5]

so i should go with the 24/28 setuip in stead of the 24/26