smokesho
New Member
i have heard that some volvo rims are of few none ford rims that fit the sho.... does anyone know of some decent looking rims that will fit properly and aren't usually too much.
some rims, cheap???
- Thread starter smokesho
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
ChrisR
SHO Member
I would go with some windstar rims. I have seen a few around here with some really nice looking Chrome rims. They look like 16's. they have the same bolt pattern, not sure about offset.
Chris
Chris
SHO2NV
Not low anymore
Always keep an eye on eBay. Don't just search for wheels that fit the SHO, do a search for all wheels. I only paid...wait, nevermind, let's just say I got a killer deal, and the thing is, they didn't turn up on a search for SHO stuff. Good luck.
------------------
John
Green 94 ATX
SHO2NV
------------------
John
Green 94 ATX
SHO2NV
90MTXSHO
Prez for Life
I have an easier way to get rims...and cheaper!
All you need is...
1.) Four cinder blocks,
2.) a few lug wrenches,
3.) some "spotters",
4.) a dark night
Have fun!
------------------
Clint
90 Elec. Red SHO
AIM/AOL: Shaft481
My Pimpin Webpage
All you need is...
1.) Four cinder blocks,
2.) a few lug wrenches,
3.) some "spotters",
4.) a dark night
Have fun!
------------------
Clint
90 Elec. Red SHO
AIM/AOL: Shaft481
My Pimpin Webpage
smokesho
New Member
windstar rims eh???? hmmmm. interesting.....as for the dark nite...well
i dunno about that. thanks for the suggestions
NJshofear
New Member
ive got three mim asti 17x7.5 (maybe 7) wheels for sale, one is slightly bent but i think can be fixed, two are in good comdition, and the forth one i think is a loss.
------------------
Jeremy
Red 89 SHO
MODS:
-Upgraded brakes,
-17x7.5 Alesso Turbo(hyper black) wheels W/falken GRb fk451 tires (225/45/17)
-Custom bent single exhaust exiting under SHO on the back bumper
-Coilovers from IPT (when they come in)
-Pioneer head unit, with 2 Rockford Fosgate 12inch subs, and RF amp
-Two row copper radiator
Coming soon: SFC, LSD, forced induction (twin-turbo or a S/C)
AIM:Tiedie6683
------------------
Jeremy
Red 89 SHO
MODS:
-Upgraded brakes,
-17x7.5 Alesso Turbo(hyper black) wheels W/falken GRb fk451 tires (225/45/17)
-Custom bent single exhaust exiting under SHO on the back bumper
-Coilovers from IPT (when they come in)
-Pioneer head unit, with 2 Rockford Fosgate 12inch subs, and RF amp
-Two row copper radiator
Coming soon: SFC, LSD, forced induction (twin-turbo or a S/C)
AIM:Tiedie6683
smokesho
New Member
email me with a price, and a pic if you don't mind... i will explore reasonable options.....
DeaconBlue
SHO Member
The 17 x 8.0" Borbert type E rims that I have are not an SHO fitment. They were listed for a Volvo S80 T6. Most of the FWD Volvo's have the same 5 x 108mm or 5 x 4.25" lug pattern as the Taurus/Sable/Continental/Windstar as well as the older T-Bird/Cougar. The Volvo's hub bore size is about 1 to 2mm larger than the Taurus but the offsets are almost identical. Check out the wheels offerings at Discount Tire and the Tirerack using the Volvo FWD applications.
Just remember that you need to use some extra care when bolting up a set on non-hubcentric wheels on your car. I use a 4-step hand tightening process (with a torque wrench) in the proper 5-point star pattern; seated finger snug, 50 ft/lbs, 75 ft/lbs and then 100 ft/lbs.
------------------
95 MTX
with a few mods
Just remember that you need to use some extra care when bolting up a set on non-hubcentric wheels on your car. I use a 4-step hand tightening process (with a torque wrench) in the proper 5-point star pattern; seated finger snug, 50 ft/lbs, 75 ft/lbs and then 100 ft/lbs.
------------------
95 MTX
with a few mods
Similar threads
