Hey guys, wondering if anyone has attempted to locate a replacement gasket for the oil cooler. Its the one that goes in between the oil cooler adapter and engine. I called up my local ford dealer and he said that they no longer make it and he could not find one anywhere. Also anyone had any luck fixing the leaky o-ring in the oil cooler. I know there was a write up on v8sho.com but the o-rings mentioned do not seem to do the job. Thanks in advance!
Oil cooler gasket
- Thread starter siebert37
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
E1 v2
crash tested
http://www.v8sho.com/SHO/RepairingaLeakyOilCooler.htm
5 years and the O rings mentioned in this link are still sealed tight.
There WAS a problem with the teflon rings mentioned in this thread -
http://www.v8sho.com/SHO/OilCoolerOring.htm
You DON'T want the white ones.
5 years and the O rings mentioned in this link are still sealed tight.
There WAS a problem with the teflon rings mentioned in this thread -
http://www.v8sho.com/SHO/OilCoolerOring.htm
You DON'T want the white ones.
midnightauto
THE CHOP SHOP
The last new ones I had came in complet gasket sets from ford. A year ago they were $1350 I reuse them if they are not damaged spray it down with Hi-Tack after cleaning.
Is the 3.2L Oil Cooler Similar?
Hey Guys,
I am using a 3.2L from a '93 in a project car, and a lot of oil is leaking from between the block, and the oil cooler. I went to the link in the above, and the part with the 30mm nut looks very similar to what I have. Can it be removed the same way and a new gasket installed?
Thanks!
Joey
Hey Guys,
I am using a 3.2L from a '93 in a project car, and a lot of oil is leaking from between the block, and the oil cooler. I went to the link in the above, and the part with the 30mm nut looks very similar to what I have. Can it be removed the same way and a new gasket installed?
Thanks!
Joey
Similar threads
