Need Help - Door locks stopped working...

[SuperSho92]

I have a 93, non-RKE MTX and my pwr door locks stopped working subsequent to installing Recaro seats - curious, are the door locks tied into the wiring harness underneath the drivers seat?

I have searched and have tried a few checks - the fuses are in working condition, the windows still work, I have also swapped the switch with a known working switch and still no locks...

Has anyboady run into this? If so, is my assumption correct - is the harness underneath the seat relatd to the locks? Further, if this is the case, can I make a jumper to fix this issue?

 

[hawkeye18]

have you checked the engine compartment fuses? There's one labeled "PWR LOCK/SEAT" that's 40A...

 

[SuperSho92]

No, but will do tomorrow...

 

[SuperSho92]

Thanks hawkeye - you hit this one right on the head. 40A fuse blown inthe engine compartment. Strange that the windows worked, but I'm dont care - i have door locks again!

 

[Storm-Chaser]

. . . . and yes, the harness-leads for the door locks run under the driver's/passenger's front seats.

 

[hawkeye18]

Glad to hear I could help! I was going to post the circuit for you, but my god... it was three confusing-ass pages, and all I could really make out was that they all went through that one fuse lol.

 

[SuperSho92]

LOL - I still dont understand why the windows still worked, but its working...

 

[Storm-Chaser]

Because the door locks and windows are on separate harness circuits. Even the Master Window and Door Lock Switch have separate modules under the plastic door panel cover.

 

[SuperSho92]

Gotcha. Thx!