mishman
New Member
I replaced the clutch last month on my 95 MTX SHO, and shortly after I experienced clutch pedal vibrations as well as a wierd sound. The sound was similar to a bearing that is failing, kind of a growling noise. I took the car apart tonight and found that all of the PP bolts are torqued to the proper spec, which is 24 ftlbs i believe. The clutch looks fine, as does the throw out bearing. The throw out bearing still has the little nylon pin in it. The noise I am trying to remedy only occurs when the clutch pedal is up ( whether i am in gear or neutral it always makes the noise), when i press the clutch pedal in the noise clearly stops. I spun the input shaft into the tranny and it has no play, so that main bearing is not gone. Should I take the tranny apart? could my flywheel be warped or something? Also there was no locktite on the PP bolts or flywheel bolts. I am not sure what steps i should take at this point.
