Need 3.2L pistons or low mi short block

[3d914]

I'm looking for a new/used set of pistons. Below are my bore dia's minus the clearance, leaving the minimum target piston dia. (measured on the piston pin centerline, rotated 90deg)

1. 3.6229-(.002x2) = 3.619
2. 3.6225-(.002x2) = 3.619
3. 3.6229-(.002x2) = 3.619
4. 3.6224-(.002x2) = 3.619
5. 3.6230-(.002x2) = 3.619
6. 3.6231-(.002x2) = 3.619

As an alternative to pistons, I'm willing to consider a good condition 3.2L V6 (Gen-II) short block. I don't need crank, mains, etc. I just need matching block, pistons, pins and rods - all within spec.

TIA