Msd coils

[chrisjobe]

Just put it on a dynojet and you can have whatever you want. Since the numbers on a dynojet rely on the facility properly maintaining, configuring and calibrating the device


Sent from my iPhone using Tapatalk

 

[FiveLeeter918]

Ouch! I had a 93 Ford Probe back in the day with one of those ground feed cold air intakes. Loved it until I went through a 6" deep puddle and thought I hydrolocked the motor.

 

[chrisjobe]

Ouch! I had a 93 Ford Probe back in the day with one of those ground feed cold air intakes. Loved it until I went through a 6" deep puddle and thought I hydrolocked the motor.

I had a densecharger on my mustang. Day before I deployed I had to get my last bit of gear from on post. Tropical storm ernesto dumped on us while I was in getting the gear. Waited 5 hours trying to wait out the storm. Said screw it when it lightened up. Hola hydrolock


Sent from my iPhone using Tapatalk

 

[Wsho]

Yes, yes you should.

I ask HR and she said she don't see a problem with it.
This is what I will do.. I will order 5 pack of 6-pack MSD coils for $110 for the first 5 that go to Holly.Com find and give me the part number that you need for your SHO. .. I will use PayPal for payment and that will be shipped to your door after I receive them. I would do all this in 2 week.

 

[Angrymongoose]

Did something change on these cars after 2016? Everything says none of them fit a 17 Sho, which makes no sense to me at all. I see nothing different about the 13-16 vs the 17.

 

[SM105K]

I ask HR and she said she don't see a problem with it.
This is what I will do.. I will order 5 pack of 6-pack MSD coils for $110 for the first 5 that go to Holly.Com find and give me the part number that you need for your SHO. .. I will use PayPal for payment and that will be shipped to your door after I receive them. I would do all this in 2 week.

I am in. I will need these. PN 82576
https://www.holley.com/products/ign...ncoln-mercury/ford_ecoboost_coils/parts/82576

PayPal is ready right now.

 

[MHW100]

I am in. I will need these. PN 82575
https://www.holley.com/products/ign...ncoln-mercury/ford_ecoboost_coils/parts/82576

PayPal is ready right now.

Is this 82576 part ok - it says for Taurus up to 2015.

 

[ridered74]

In if there are spots left. Can't hurt to have 6 spares laying around.

825763

 

[Angrymongoose]

Screw it, I'm in too. I need part 82576 just like SM105K. Paypal ready today as well.

 

[SM105K]

Is this 82576 part ok - it says for Taurus up to 2015.

My fat fingers hit 5 instead of 6 for the last number. That is why I posted the link from Holley.

 

[MHW100]

My fat fingers hit 5 instead of 6 for the last number. That is why I posted the link from Holley.

Sorry I meant is that part ok for cars newer than 2015?

 

[ridered74]

Sorry I meant is that part ok for cars newer than 2015?

2013 and up use the same coils. 2010-2012 are different from the newer ones.

 

[fordfanstan]

I'm in for PART# 825763

 

[Zpak]

If I’m not too late put me down for
Part# 825765

let me know and I’ll shoot you the payment.

 

[Wsho]

Sorry guys I was gone for a week went back to New York for Thanksgiving it's late I'll gather up all the information and I'll let you all know. double-check your part number make sure you have a 2 pin or 3 pin connector. P.M me your part number I'll get to it by the end of the week

 

[SM105K]

PM sent.

 

[skyshadow07]

^ That's what a garden hose and spray nozzle are for. Or just start throwing buckets of water it while dyno pulling.


*This is a joke, calm down and step away from the keyboard.*

 

[SM105K]

My car has only been run on a Mustang AWD dyno. They are known for being a heart breaker dyno. For the past 3 dyno sessions HP has stayed the same 391,389,390.9. TQ has moved, 470, 468, 494. The 494 tq that last pull was with my new DP's and 3rd cat and stock resonator delete. I try to dyno the car after every MOD and document what has worked on my SHO.

I would say the Dyno is pretty close. The math says is it takes 426 hp to the tire to move a 4560 lb vehicle a quarter mile at 110 mph. 426 to 391 is a difference of roughly 9 percent. I just want the damn 400 hp/500 tq dyno sheet. Maybe the MSD coils can get me there....if not it is still an upgrade and it costs me 70 bucks to get the car dyno'd.

 

[Wsho]

Okay so far I have 4 request for coil packs and you all I have the same part number 82576. I will submit the order Friday anyone else want in?

SkyShadow
angrymongoose
Zpak
SM105k

 

[Scrwloose26]

Okay so far I have 4 request for coil packs and you all I have the same part number 82576. I will submit the order Friday anyone else want in?

SkyShadow
angrymongoose
Zpak
SM105k

I’m in. PM sent.


Sent from my iPhone using Tapatalk