Looking for the lower timing belt cover, locally if possible

[jbserra]

Anyone local have a spare lower timing belt cover? Mine had something fall on it in sub-zero temperatures...

If this has to go in the auto parts section, then please move it. I just wanted to check locally.

Thanks.

 

[Michelle]

Your post is just fine. I don't think Adam has an extra one, but I will ask him later today and let you know.

I think you posted on CL already, so hopefully you can get one local.

 

[jbserra]

Great, thanks. Yes, I hit CL too.

What, do you have a SHO alert for CL too?!? I thought I was the only one

 

[Michelle]

Great, thanks. Yes, I hit CL too.

What, do you have a SHO alert for CL too?!? I thought I was the only one

I don't think we are even the only people either.

ETA: Just checked with Adam, he doesn't have one.

 

[Kickinsho]

Excuse my ignorance, but does it matter if it's a 3.0 or 3.2? Andy said we might have one in the garage on one of the spare engines.

 

[jbserra]

Excuse my ignorance, but does it matter if it's a 3.0 or 3.2? Andy said we might have one in the garage on one of the spare engines.

That's a mighty fine question. I'm not sure. I thought the pulley setup was slightly different, so I wasn't sure if that affected the timing belt cover. I'll get a picture of the one I cracked.

 

[Kickinsho]

I will have Andy take a look at this and see if we have one. Both of us have to work tomorrow so it might Saturday later, or Sunday before we can get back to you about it.

Sorry for the delay.

 

[Kickinsho]

I will have Andy take a look at this and see if we have one. Both of us have to work tomorrow so it might Saturday later, or Sunday before we can get back to you about it.

Sorry for the delay.

Okay, things were crazy over the weekend as we both worked. Andy just took a look at the picture you attached and will see if there is one out there...

 

[jbserra]

Okay, things were crazy over the weekend as we both worked. Andy just took a look at the picture you attached and will see if there is one out there...

I used some JB weld and that seems to have fixed it up nicely. I had to get it back on the road for my Monday commute. Let me know if you do have one and what you want for it. I'm sure I'll have it off again in the future and could swap it then.

Thanks.