Lookin for feedback

[JSIL1]

Curious what you all think. I have my favorite out of the three, but am curious what you all think. Honesty is the best policy, so critique at will

STOCK

#1

#2
#3

thanks

The factory inlet has been increased on pics 2 and 3

 

[Porkchop]

looks like the front end of a Cayenne twin turbo. I don't like it personally, there are better choices out there...

Hey you said to be critical and honest

 

[JSIL1]

much appreciated

 

[RAYJAY]

looks like the front end of a Cayenne twin turbo. I don't like it personally, there are better choices out there...

Hey you said to be critical and honest

yea what he said :vomit: ...... but if you like it, its your car

Jeff

 

[JSIL1]

fair nuff, wasn't doin anything just curious, thanks

 

[SHOZ123]

FWIW the GEN 3 could use some increase in open area at the grill, but not on the sides. Unless you plan on moving some coolers to that area that is.

 

[f150fan]

:***: I'll let the faces do the talking....Stay with the stock...

 

[JSIL1]

FWIW the GEN 3 could use some increase in open area at the grill, but not on the sides. Unless you plan on moving some coolers to that area that is.

That's was my thinking, two small intercoolers for twin turbos.

 

[E1]

I like #1

 

[stephen newberg]

I will also cast a vote for the stock situation looking best.

pax, smn

 

[KILLA]

I dont like it to be honest.I only seen one perspective, but if i were you i wouldnt spend money to change something that will look just as good if not worse that stock.

 

[JSIL1]

My main thinking behind it all was two intercoolers behind the side inlets, and a larger amount of flow into the engine area. It stared with just enlarging the stock grill and then I got bored so I started to tinker

 

[SNOOT]

I like #2 ...

 

[HoustinoJillian]

best case scenario to me would be to stuff 2 intercoolers behind the stock bumper inlet. i dont have a g3, so i don't know if that would work for spacing, but i just dont like those huge inlets.

 

[SHO#7]

Keep it stock and do something about the screw holes. Either put the plate back on , or have them repaired. They **** the clean look.

Mike

 

[JSIL1]

those are gettin fixed when I get the car painted. Figured I fiberglass behind the holes (back stop) and then fill them with bondo

 

[jrcrum]

front plates i have to have them

 

[JSIL1]

I think I am supposed to also, but I have IL plates in CO so no one is gonna say anything at least I have been lucky with the front window tint

 

[NebraskaSHO]

grills kinda look like an olds aurora but #2 is pretty good for just tinkerin