Im gonna build this wheel...Comments??

[cudaz101]

What do they have in 17x8? And what size do they have Cobra wheels in?

There is a Bullet cast availalbe in 17X8 but thats all Im seeing.

The casts for the CobraR look to be 16X8, 17X9, 17X10.5, 18X9, 18X10


Brad

 

[cudaz101]

Im going to build the Euromax 612 in a 18x7.5 +32MM offset with a Silver painted finish. This will fit gen 1 2 3 as well as all of the MN12 & MN10 platforms. Hope this is found as a suitable wheel option for you folks. This wheel should be available by late December or Early January.

If you have any questions or concerns you can PM me or post it up here.

Cheers!!

Brad

 

[zak]

The SHO community has a Infatuation with 95 Cobra R wheels. 17x8.

-Sam

Especially if they were actually 17x8 or 17x8.5. The run that was made (actually for the T-bird) was only 17 x 7.5 . . . .

Brad, 32 mm is too low of an offset for a 7.5" wide wheel on a SHO (scrub radius issues, fender clearance esepcially on the rear with 245s). 35 mm would work better.

 

[typhoon5000]

There is a Bullet cast availalbe in 17X8 but thats all Im seeing.

Brad

I am definitley interested in a set of 17x8" +36-38mm offest Bullitts. I understand your situation, no rush. Just let me know if and when you are going to make them, if you decide to.

Oh, and if you could post the weight of their current 17x8" Bullitt casting (whatever bolt pattern), I would appreciate it. I just want to get a good ball park, +/- 1lb, of their weight.

 

[llamaking122]

whats the price i didnt see it newhere that is a rlly nice rim in gum metel