I screwed myself...I need help with my locks/alarm

[SHOfear]

Ok, I had a clifford alarm installed in my sho. Recently, it had been acting up, and I was told this kind of thing happens there are two alarm systems installed in a car (factory and aftermarket), so during a party on Monday, my alarm started going off for no reason, and I wouldn't shut off unless I had the car running. As soon as I shut the car off, the alarm would start going off. Well, in an angry (drunken) stupor, I opened the trunk, took out the back seat, pulled out the interior with a screw driver, and ripped out the harness and a huge chunk of wires that run the locks/alarm/keyless entry. For the past couple of days, nothing has worked (alarms/door locks, keyless entry) And the kicker is, I cant find all the stuff I ripped out. Can I just get the chunk of wires from the dealer and splice them back in? Thanks

Steve

 

[Mr Anonymous]

The little black box controls the keypad/remote keyless & the power locks. If you butchered the wires when you pulled them, I have them out of a '94 parts car that I can give you if you want them.

Wouldn't it have just been easier to yank out the siren!?!?

If you want the wires, just shoot me an email and we can hook up.

 

[SHOfear]

Yes, I will definitely take those wires. It is a huge pack of them, right? They will work with my locks, keyless entry pad, and alarm, right? Thanks, and where do you want to hook up?

Steve

 

[Mr Anonymous]

Any time before ~3PM Saturday (going to the Pats game!), or any time Sunday should be good for me. I'm in Everett, so just about anywhere works for me. I'll email you my cell #.

It's a good size harness with the 3 connectors that go into the module. It should resolve the problem with the locks & keypad, but the Clifford alarm might still give you a problem once it's hooked back up. If you want, I can help you to troubleshoot it, it's probably the impact sensor needing adjustment or replacement.