i have a need for my SHO'S SPEED

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

shogansta

Change Username
Joined
Jan 29, 2004
Messages
602
Reaction score
114
Location
Istanbul Turkey.
hi i really need to get my car to speed up a little i have a gen3 and what type of mods for some stuff to make the car run a little faster thanks for all youe help
 

97V8SHO

V8's Own ALL!
Joined
Nov 30, 2003
Messages
359
Reaction score
0
Location
Oklahoma
Just do standard stuff to it like intake & exhaust, or if you really want to you could add some nitrous to it :D Go to www.v8sho.com they have a bunch of articles on everything. Have you had your cams welded yet?
 

Tomlinson 97 Ebony

New Member
Joined
Jan 24, 2004
Messages
6
Reaction score
0
Location
Connecticut
Simple, inexspensive mods are exhuast and intake. You can get nice sounding mufflers along with the resonator cut-off to give a deep throaty sound. There are many different kinds. Borla, Flowmaster, Bullit, Ravin etc.. I recommend flowmaster. stick with the 40 series not delta. Second mod can be a K&N Cone filter.(approx. $50) at autozone, pepboys. Installation is under an hour. Good luck

Bill T.
97 Ebony
117K - no welds
Flowmaster 40's
K&N Cone Filter
[email protected]


shogansta:
hi i really need to get my car to speed up a little i have a gen3 and what type of mods for some stuff to make the car run a little faster thanks for all youe help
 

97V8SHO

V8's Own ALL!
Joined
Nov 30, 2003
Messages
359
Reaction score
0
Location
Oklahoma
Not much you can do then other than a Trans Go shift kit, you should do this if you need a rebuild because you have to take out the trans to do it. Or nitrous, go with a ZEX kit. Unless money is no object or you have alot of it, get a blower from shofast. You could also take it to some one and get the heads port and polished along with a bore and bigger injectors.
 
Back
Top