Gen1 foglight mounting bracket

[blacklabel]

While taking the foglights out of my car to swap the housings, the nuts seized and broke the bolts that are attached to the brackets. Is it possible to replace those bolts or do I need new brackets? Where could new bolts or brackets be purcahsed?

Thanks

 

[SlowHeavyObject]

you can get just the bolts as long as they didn't break off with a piece still left in the bracket. if you can remove your foglight housing then you are usually good. just goto home depot, lowes, or your local pep boys/autozone/strauss bolt section and pick up a similar bolt/nut combo. if you need new brackets try here or ebay but they're a pain as the top part is attached to the bumper support.

 

[blacklabel]

There is still a piece left on the bracket. The bolts came out with a part of the bolt thing still in it. I'll try looking on ebay and maybe post a WTB here. This same thing happened when I took the fog light housings off of a junkyard SHO.