Ford Part numbers for TB Coolant hoses?

[Off Road SHO]

Anybody have the Ford part numbers for the stinkin little U-shaped hose underneath the TB? In fact if you happen to know the part numbers for all those little hoses (the ones that you need Gumby hands to get to) I would appreciate it.

Thanks

Tom

 

[AutoSHO]

V6 Coolant hose 8, TB to IAB, KM-1723 E9DZ-8548-E
V6 Coolant hose 7, IAB to engine, KM-1722 E9DZ-8548-D
V6 Coolant hose 6, TB to engine, KM-1721 E9DZ-8548-C

Taken from the 60k section of SHO Nut Performance. Those should be what you need!

 

[srfdude]

NAPA has the U-shaped hose for a few bucks.
Mike

 

[Off Road SHO]

Thanks,

Just what I needed.

Tom

 

[fred79]

when mine burst I jurry rigged it and went to a ford dealer (of course it blew again on the way)but I just took a pair of plier and yanked one off they aren't that hard t get to just disconnect teh wirering around the area and pull the intake tubing off. I took it in and the guy matched up some tube and cut me a length. he even gave it to me for free!(from a dealer too) only problem was that it was a total pain in the **** to get it on in the parking lot because i was so much tighter than the old one. but it is still working well.

but then its still nice to know the numbers since they couldn't even find what I talking about on the part computer until I brought it in.

 

[SHOZ123]

Just use bulk 5/16" hose. Or better yet just bypass the TB and IAC coolant passages.