ECT sensors

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

wood_e

The dude
Joined
Jun 5, 2003
Messages
1,620
Reaction score
2
Location
Ames, IA
Wells PN: SU201

You need a 1 inch deep socket or a 1 inch wrench. It's to the lower right of the throttle body. It is a 2 wire connector. Unplug it and take it out, some coolant will come out. Wrap the new sensor in some teflon tape & screw it in. Tighten it up and connect it back up and you shuold be good to go.
 
Back
Top