clutch question.

[mike25]

im about to replace my clutch in my 92 sho,so i have a few questions, do u have to replace pressure plate bolts or can u reuse the old one's.second whats the best clutch for a stock sho.:thankyou:

 

[kevinspann]

Stock SHO = stock clutch

 

[trainguy1989]

The truth^

I reused my PP bolts with no issue.

 

[Ishodu]

Clean the old bolts up with a wire brush and inspect them to make sure they threads are in good repair. Make sure to use blue thread locker on them as well.

 

[91PDXmocha]

what others have said. clean up the bolts use locktite. Get a decent name brand clutch kit that is def the 9.75 " not the 9.25 . Stay away from no-name lifetime warrenty autozone clutches and others like them. Most decent kits at least have valeo stamped parts in them. Good luck with the install.

 

[mike25]

thank's everyone for the helpful info.

 

[itwonder]

The best clutch is the stock SHO clutch, as others have said, but get the shonutperformance.com ceramic throw-out bearing insteadof using the one that comes with the kits.

 

[jedhead]

I'll second using Josh's Ceramic throw out bearing.

Bob