Bad injector seals

[tardboy21]

Well, I was visiting my parents this last weekend, and I pack up my stuff and was getting ready to head back to my apartment, when I noticed a little smoke coming out of the front of my car. Popped the hood and realized I had a leaky injector o-ring.
It appears it is just coming form the o-ring. This is actually good timing since I just finished polishing and painting my intake last night to go on. My main question, is since I'm in there, I am in there I just want to replace all the injector seals. Is this the right part to order from napa?
http://www.napaonline.com/masterpag...ber=212085&Description=Fuel+Injector+Seal+Kit

Advantages/Disadvantages of not replacing pintle caps?

 

[Mr Anonymous]

Wrong part. You want http://www.napaonline.com/MasterPag...ber=212069&Description=Fuel+Injector+Seal+Kit (6 of them).

Leave the pintle caps alone. You'll do more harm than good trying to change them and the NAPA kits don't include them anyway.

 

[tardboy21]

ok, please help me if I am missing something, but is the large o-ring not used?

 

[SASHO91]

Nope. Trash it. All you need is the spacers for the fuel rail to injector, and injector to head(which are seals as well), and the O-ring.
Use either oil or grease upon installation to ensure you do not rip or tear an o-ring.

 

[tardboy21]

Ok, that answers my question. One last one.

Could I just go with size of these.
http://www.napaonline.com/masterpag...ber=212093&Description=Fuel+Injector+Seal+Kit

and buy the rail to injector o-rings separately? (2 pks)
http://www.napaonline.com/masterpag...=ES70600&Description=Fuel+Injector+O-Ring+Kit

These are what they have listed for the SHO, I just want to make sure they are the right size before I end up spending $30 on seals that aren't the right size. Don't mean to be a pain in the ****.

 

[tardboy21]

I'm guessing no one has anymore insight as to those other o-rings and seals. I will be tearing into this tomorrow, so I will see what napa has and let you know tomorrow.

 

[Mr Anonymous]

Buy the Toyota set I linked earlier. They are the exact parts except for the large o-ring which you simply discard.

I've used at least 30 sets of them.

Just because they list something for the SHO doesn't make it right.