TheSH0Man
5 Speed Taurus?
Does the ABS sensor slide out of the knuckle or do you have to tap it out?
ABS Sensor
- Thread starter TheSH0Man
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
rangerj
Active Member
The sensor should slide out. However, they usually are rusted in place and it is very difficult to remove it without destroting it. Try using a penetrating oil, such as PB Blaster or Liquid Wrench, and soak the sensor. You may get lucky and be able to work it loose without breaking it. When you put the sensor back in apply either silicone grease or anti-sieze compound so that if it ever has to be removed again it will come out much easier.
