1994 Taurus SHO Driver's seat needs new leather!

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

cmeseadoin

I'm Dick
Joined
Jul 6, 2007
Messages
39
Reaction score
0
Location
Glen Allen, Virginia
Hey Guys,

I have an extremely clean almost perfect example of a fully optioned white 1994 Taurus SHO 3.2L ATX with the full mocca tan leather interior. This was my father's car and the car is about close to perfect with 105K miles. It has never seen a paint shop, never been wrecked or fender bended, and spent all of it's life in a garage. The only thing that is wrong with the interior is that dad never conditioned the leather (not sure that would have helped that thin/cheap FORD leather anyways). The leather is cracked all the way through in multiple places and looks horrible. The passenger seat is fine. I am looking to either have the seat redone by a leather shop (will cost $$) or find a seat or seat pad from another that is about equal to the passenger seat in my car. My question is, does anyone know where I might be best able to find a mocca tan leather seat or just seat pad from one of these cars for sale? I have been searching ebay and they have some parts, but no seats from these cars. I am not sure I want someone to redo it because it wilk take a very skilled person to make the new leather pad look like and fit like the passenger original. I would like to find one that is just in excellent shape and is stock. If anyone can help me with this, please contact me here or on "[email protected]." Thank you!! :)
 

Kens1992mtxSHO

Ken is a bad, bad boy and should be banned
Staff member
Club Mod
Joined
Jun 4, 2007
Messages
2,526
Reaction score
293
Location
The Commonwealth
One of the best things to do is just peruse the classifieds here on the forum. There are always people parting out SHOs here.
 

cmeseadoin

I'm Dick
Joined
Jul 6, 2007
Messages
39
Reaction score
0
Location
Glen Allen, Virginia
Thank you, I will do that too......I would like to find something as the car is too nice to sport a crappy looking seat pad and it is only getting worse. If you hear of anything, please let me know!! Thanks again!
 

94'whiteSHO

New Member
Joined
Jul 15, 2006
Messages
95
Reaction score
0
Location
mass.
well if you go to a junk yard and take the passenger pad... you can make it fit the drivers seat... just a thought, seeing where as almost always the passenger seat is in better condition.
 

94'whiteSHO

New Member
Joined
Jul 15, 2006
Messages
95
Reaction score
0
Location
mass.
ohh and make a cut out for the seat controls on the opposite side... you wont be able to tell the cut out from factory for the passenger it will be hidden under molding.
 
Back
Top