Search results

  1. stangconcepts

    Rod shifter and no rod Trans

    Is there a car other than the sho that has the same trans? Or another trans that will work?
  2. stangconcepts

    Rod shifter and no rod Trans

    Can a 95 sho with rod shifter use a non rod shifter trans from an older sho?(with out changing to a cable shifter)....... I have seen others talk about other trans that will work in a sho but never heard a definite yes. Is there another trans from another car that will work in a MTX? Thanks Rich
  3. stangconcepts

    95 MTX No secondaries? And Tranny Prob

    I have chased all the vacum lines and still have not found the problem. I am a mech but I did not have time to do the tune up myself and wish I had since that was when it all started. When I say a tune up I just mean the basics not a 60K.I do need a good MTX If any one has one. What I described...
  4. stangconcepts

    95 MTX No secondaries? And Tranny Prob

    I have a 95 MTX And had a tune up done and after that I have had no secondaries. If I run the thing up till the rev limiter kicks in it feels like the secondaries kick just before the rev limiter.I have checked for loose conections and bad vacum line with no luck. When you start the car the...
  5. stangconcepts

    Ignition Cylinder Replacement please help

    OUCH :eek: :eek: :eek: Not what I would have done but at least you can start the car cause you dont need the key in it.When mine got stuck I tried a punch to get the pin in and it didnt work and that when I drilled it.
  6. stangconcepts

    Ignition Cylinder Replacement please help

    I have had the same problem on one of my mustangs and it is the same to remove.what you need to do is take a drill bit the same size as the little peg that you would push in and just drill it out.Then you can pull the switch out.You will not hurt anything but when putting in the new one you need...
  7. stangconcepts

    overspray on windows

    Yes a razor blade will work fine I have been doing it for 15 years and have yet to scratch the glass. :cool:
  8. stangconcepts

    wont start now

    Ok I will PM you and thank you.Does any body have a comment on the fuel pressure bleeding off so fast? My mustangs I can let them sit over night and they still have some pressure in the system. :confused: Pressure regulater? Does anybody have one? I would like to try that and a new fuel filter.
  9. stangconcepts

    wont start now

    I have looked at the DIS no cracks wires tight.Unpluged the CCRM and all looked clean and tight, Looked at all the grounds I could see and they are tight. Cleaned the battery terminals.Which would give me trouble if I did the check with the car cold?Please hummor me when you talk about a part...
  10. stangconcepts

    wont start now

    OK first off Thank you for all the help I think I will need to make a donation after this :thumb: ...I went and played some more.I got in turned the key and heard the pump prime the started the car and it did fine.Let it idle for a second and shut it off and restarted it.OK I jumped the wirest...
  11. stangconcepts

    wont start now

    Ok :thumb: I went down and play a bit more.I got in and turned the key to start and it took a second but it started slowly I guess the lack of fuel pressure and then it cam up slowly to normal rpm.I let it run until I saw the temp come up a bit then revd it to 3500 rpm.I tried turning the wheel...
  12. stangconcepts

    wont start now

    I am going through all the search stuff and I am checking the fuel system as per a thread on fuel system checks and I am still lost.I may need a CCRM if any of you have one let me know a price.The sticker on it is pink and white with a Large letter D on it and part# F3DF-12B577-AA AND THE NUMBER...
  13. stangconcepts

    wont start now

    Ok I was playing with the SHO tonight and I moved it and let it run for about 15-20 min.I got in after the temp cam up and I reved it to about 3500 RPM.I turned the wheel a little and noticed it would push back a little.I here it sqweel at lock, but no where else.So I reved it when I turned the...
  14. stangconcepts

    Hood Scoop

    If you are truely intrested in scoops and other body mods Pm me and I will talk to you about it.
  15. stangconcepts

    Hood Scoop

    If Anybody Wants Hood Scoops (or Any Other Body Mods)i Can Fab Them Or I Do Fiberglass Work And Could Make A Mold If There Was Enough Intrest In It. Pm Me If You Are Intrested.if You Want To See A Little Of My Work Look At My Thread On The 65 Mustang.
  16. stangconcepts

    Fuel pump relay

    I guess know one likes to help me after the first Question.Well ok I guess I will have to BLOW UP THE SHO :ruhroh: A little C4 and a camera will be fun. :madflame:
  17. stangconcepts

    Fuel pump relay

    OK first what is CCRM? The fuel pump works fine weather the car dies or not and the fuel pump cut off switch is fine.This happens after running the car for a while and I'm not real sure it if in the fuel system but the last time it died I had no fuel pressure at the relief valve on the rail.I...
  18. stangconcepts

    Fuel pump relay

    Where is the fuel pump relay located.What else can cause the fuel system to cut out other than the pump and where is it? :bonk:
  19. stangconcepts

    Oh oh after oil change..

    Is the car a MTX? Does the tick go away if you push in the clutch?mine did that.and it was the throwout bearing.
  20. stangconcepts

    Is it the cps?

    Ok, well I have checked fuel,plugs,wires,spark,and codes about 20 times.if I start the car,I can start it 5-10 times then it will give me the no start problem.If I try to start it with out turning off the key it will not start.If I turn off the key it will start after 1-3 times.It did one weird...

Latest posts

Forum statistics

Threads
107,087
Messages
1,181,310
Members
16,153
Latest member
lapochkarr

Members online

Total: 352 (members: 4, guests: 348)

Share this page

Back
Top