Search results

  1. P

    Rear Brakes Wont Bleed - Just Installed New Brakes

    Cool, thanks man. Will try tomorrow.
  2. P

    Rear Brakes Wont Bleed - Just Installed New Brakes

    Thanks guys. But why would they work 20 mins before and all of a sudden not? Would changing the brakes do something to the lines? The rear suspension was not loaded, the car was on jack stands. Would this be the problem? Thanks a lot for your help. -Peter
  3. P

    Rear Brakes Wont Bleed - Just Installed New Brakes

    Replaced the front pads and rotors 6 months ago. Rear calipers where sticking so I just put in new calipers, pads and rotors on the rear. Front brakes bleed fine when pumping the brakes. When trying to bleed the rear by pumping the pedal, nothing comes out and the pedal wont budge. Any ideas...
  4. P

    94 Wont Start PLEASE Help! Got Fuel??

    lol OK thanks for everything. Stay safe out there!
  5. P

    94 Wont Start PLEASE Help! Got Fuel??

    hawkeye, Im confused. Everything I search about on here for code 336 refers to insufficient exhaust backpressure. Does this still have to do with the EGR? When searching I found that 332 refers to an EGR issue..
  6. P

    94 Wont Start PLEASE Help! Got Fuel??

    Wow, thank you very much. :hail: Where do you live? Seriously I owe you a beer lol or lunch. I understand everything you are saying. Thanks for being so thorough. I will do some research about how to unclog the EGR and read up on the 60K. Also, my overdrive switch doesnt work. I was...
  7. P

    94 Wont Start PLEASE Help! Got Fuel??

    hmmm would this leak onto the exhaust piping after the cats?
  8. P

    94 Wont Start PLEASE Help! Got Fuel??

    Im not sure if my water pump is leaking. Ive never had to replace one so I am going to have to do some research on here to find out how I can tell if its leaking. The car didnt hickup or sputter at all when it left me stranded in the parking lot. I just came out and it wouldnt start. Today it...
  9. P

    94 Wont Start PLEASE Help! Got Fuel??

    Here are the videos I just took. I have no idea how to read these lights. (sorry, the video editor in me had to add intro music lol) KOEO Test (engine off) http://www.youtube.com/watch?v=mC9AxnQW8lk KOER Test (engine on, goose test) http://www.youtube.com/watch?v=i6GmiRv7MQo THANKS for your...
  10. P

    94 Wont Start PLEASE Help! Got Fuel??

    ok Ive done all three tests and I got them on video. I am uploading now to my youtube page and will post them here in a few.
  11. P

    94 Wont Start PLEASE Help! Got Fuel??

    Thank you very much. I am going to go check it now.
  12. P

    94 Wont Start PLEASE Help! Got Fuel??

    Thank you lol So you just connect the hanging STI terminal to the Signal return pin terminal with a wire and then follow the procedures? Is this what "Jumper the STI pin and the Signal Return pin" means? Thank you.
  13. P

    94 Wont Start PLEASE Help! Got Fuel??

    Is there anyway to check the codes myself or do I need to take it to the shop to have them hook up the diagnostic tool?
  14. P

    94 Wont Start PLEASE Help! Got Fuel??

    No its not leaking out. It only sprays out when I push the valve. It came out in a pretty good stream...shot up to the popped hood and all over my arm lol
  15. P

    94 Wont Start PLEASE Help! Got Fuel??

    I drove my SHO all day then stopped for about 10 mins to get something to eat. Came outside and it would turn over but no start. 1. I checked the fuel pump shutoff switch...not the problem. 2. I hear the fuel pump kicking on when turning the key. 3. There is over a 3/8 tank of gas in it...
  16. P

    Power Window Problems w/ PIC - Plz help!

    so did you cut the end of the wire off at the boot? How did you run it to behind the door panel? Did you run it thru the same hole that the others go thru? thanks!
  17. P

    Power Window Problems w/ PIC - Plz help!

    My front pass side window was only working with the drivers side door open. So I read up on here to look for a loose wire in the wire boot in the door hinge area. I removed the boot and found the loose wire. It is a white wire that clips into that little black cylinder with all the other...
  18. P

    CANNOT find amp bypass ANYWHERE!!

    hey guys i did it with the factory harness...removed the amp altogether too. sounds great
  19. P

    CANNOT find amp bypass ANYWHERE!!

    Thank you. I remeber seeing that connector hanging there when I did the HU install. I wonder if the wiring harness I bought will plug into that like the others?? I did...lol....they had no clue. Thank you. Ill take it!! Is it the one that goes in the trunk??:thankyou:...let me try...
  20. P

    CANNOT find amp bypass ANYWHERE!!

    Ive searched online, asked best buy and a handful of car audio shops locally. Everyone says it doesnt exist. Where in the heck do you guys find these? I want to bypass it and just run the speakers off the new head unit but I cant find these. Any ideas?? :thankyou::omgsho:

Latest posts

Forum statistics

Threads
107,087
Messages
1,181,306
Members
16,152
Latest member
lapochkarr

Members online

Total: 2,866 (members: 7, guests: 2,859)

Share this page

Back
Top