Search results

  1. 1BAD91

    Removing intake on my 98....

    I'm going to pull the intake on my 98 tonight so I can replace valve cover gaskets and do some other stuff I want to do. I was just thinking, are the intake gaskets on the V8 motor reusable like on the V6? Is there any other gaskets I need to look out for?
  2. 1BAD91

    Valve Cover Gaskets....

    Where can I get a set? Mine are leaking. They have been for a while unfortunately. When Kirk welded my cams, they had to pull it apart again because they heard a weird rattle when they put it back together. Don't know if that cause premature gasket failure or what. Anyways, I cant find any...
  3. 1BAD91

    New tuner for you SHO/Flex guys!!!

    Well guys, Shawn with SSI has finally created tunes for the SHO/Flex and Explorer Sport. SSI has completely taken over the EcoBoost F150 platform. Now he's gonna do the same with the SHO/Flex platform! Shawn isnt a newb either when it comes to tuning. He's been tuning long before the boys at...
  4. 1BAD91

    Diff questions?

    I was wondering what the symptoms (if any) of a diff pin coming lose or has already been thrown? I found 2 small cracks in my diff case and cant figure out how they got there unless its just fatigue crack or if the diff pin created it. The car runs drives and shifts perfect, so I have a had time...
  5. 1BAD91

    Leaking gear oil out of tranny

    My 91 MTX is leaking gear oil out of the tranny which really sucks. I'm guessing the tranny will need a rebuild. Have any of you had any leaks from the tranny before? and from where? Is the tranny rebuildable? is there still parts avalible for the tranny?
  6. 1BAD91

    Weird oil leak.

    I just got done with my front 60k today fired it up and she Runs! but there is a weird oil leak its coming from the 2 front BOLTS on the oil pan on the bumper side. Its not leaking from where the pan meets the block it accually from those 2 bolts. Any ideas? Thanks There seems to be oil...
  7. 1BAD91

    Front sway bar bushings are shot!

    My front sway bar bushings are tooast. It doesnt look like to much fun to change. Is it easier to change than it looks? Can you get bushings from an autoparts store? and my end links are in bad shape to.
  8. 1BAD91

    I think Autozone ordered me the wrong front crank seal

    Hey guys I'm gonna do a front 60k this weekend and I had autozone order me a front crank seal, and I dont think its right, because its 4" it diameter. From what I read the seal is 2" in diameter, so it sounds like he ordered the rear seal. Is this correct or is the front seal 4"?
  9. 1BAD91

    When you did your upper 60k.....

    Did many of you have any valves that were out of spec? We did my 91 and all were in good shape. Did I get lucky or is this common?
  10. 1BAD91

    Resurrecting my 91!

    Hey I'm finally getting my 91 back on the road. It hasnt been drivin since 04. I have started it every 6 months or so, and as always it never fails to start on the first crank even with green gas. Its going to take some work to get her road worthy again. New tires, the timing belt has never been...
  11. 1BAD91

    Has anyone put a Sho motor in a Lotus 7 kit car.

    I was just wondering if anyone has done this. It sounds like a fun project.
  12. 1BAD91

    Do you think my 91 will run better after belt change?

    Hey guys im planning on reviving my 91 it has been sitting for six yrs we start it every six months or so and drive it around the block.it has 185-200k on the clock (speedo stopped working at 165k)the car has been babied its whole life it was my dads and he bought it almost new in 92.me and my...
  13. 1BAD91

    how many of you have the sho plus hood from factory?

    i have a 91 that came from factory with the plus hood.i was wondering how rare it is to have the plus hood and what its made of? i always figured fiberglass but someone told me once it was plastic.:thankyou:
  14. 1BAD91

    Hi there!

    hi everyone im a longtime sho owner.between me and my dad we have 3 sho's a 91,92,98.the 91 my dad bought in about 93 and we were in love with the first test drive.it has 200+ mi on it and has been sitting for 6 years we still start it every 4 months or so and never fails to start on the first...
  15. 1BAD91

    Exhaust leak at manifold

    Hey guys i have a 91 mtx thats been sitting for about six years me and my dad still start it every 4 months or so and it still runs great for having 200+ miles on it.it has an exhaust leak on the rear manifold.my question is can we fix it without removing the head?i want to start driving it...

Latest posts

Forum statistics

Threads
107,108
Messages
1,181,518
Members
16,165
Latest member
Lcasho92

Members online

Total: 532 (members: 1, guests: 531)

Share this page

Back
Top