Search results

  1. Autox4fun

    13+ ecu P0420,P0430

    Back story, Had most of this/these mods on My 2011 Flex - others posts about that car... but switching from that ride into a 2013 Exploder. So major updates in the way of ECU abilities.. Exploder got a built engine (other posts) but lots of stuff got swapped over, and never had an issue with...
  2. Autox4fun

    Winter project...

    Snap shot story.. Ford replaced my engine with a Ford reman, 30k miles in it lifted the head due to not cleaning one of the head bolt locations in the block. While apart I ported the heads and had them drop in ARP studs. 8K later and out of warranty it eats a couple rod bearings. I drop a...
  3. Autox4fun

    3/5/R basket mods?

    I will be going on my third Trans with this issue... Used Flex 70k on it.. I start throwing power to it and boom started slipping in 3rd and 5th. Wave washer was broken. Have used car warranty - get a Ford reman installed 12k later same issue. Pulled and rebuilt at the local Ford dealer(under...
  4. Autox4fun

    What are your trans temps

    Just checking to see what everyone is seeing for trans temps on long high runs? I tend to see 205 degrees. 2011 Flex with an aux trans cooler
  5. Autox4fun

    KR reduction - what you did and how you found your issue

    While I know there are other long winded info throughout this and other forums - this shouldn't be it. Goal 1 State facts on the leading issue "mechanically", then describe what it took to solve it. Goal 2 Make a list of known cures to refer to like a TSB. Please be respectful of others and...
  6. Autox4fun

    X35Design SHO Ecoboost Intake Manifold Spacer

    [email protected] is about to release these
  7. Autox4fun

    P1936 and P163f Vehicle ID block Corrupt - fault

    Well.... here we go again I had an issue the last time I flashed to a tune. Car was in for Trans work. I know the valve body was replaced, as they parts shotgunned the car. I handed them a Gearhead Torque Converter after it was diag'd as a bad TC. Fast Forward... Got the car back and went to...
  8. Autox4fun

    Ford parts people in need help!!

    911- red alert! NEED HELP finding a part number. I powder coated my valve covers thinking all was well. But can’t find these two gaskets/seals. They go to the air/oil separator on the rear valve cover. Vehicle is a 2011 Flex ecoboost NOTE** If you powder coat your valve covers you need to save...
  9. Autox4fun

    HPI high performance injectors

    While my engine work was happening I thought it would be a good time to have my injectors cleaned and flow tested. Because I was short on time I looked local to my area and HPI came up. I had an extra set of injectors to send in as well to get the best matched set. I sent in 12 injectors total...
  10. Autox4fun

    Sho in a Flex body

    White Flex Plate reads UR SLWR Trying to make it true 2011 Flex EB EPP intake and hotpipes with Tial EPP turbo upgrades (for sale very soon) GH turbos are going in GH IC GH Torque Converter DW lpfp Livernois Hpfp MSD coils - colder plugs RPB ported Manifolds RPB ported Turbine housings Sho HD...

Latest posts

Forum statistics

Threads
107,085
Messages
1,181,293
Members
16,153
Latest member
lapochkarr

Members online

Total: 348 (members: 3, guests: 345)

Share this page

Back
Top