Recent content by fz1nsho
-
F
heater problem?
mine did the same until the other day when the clicking quit and the blower didnt shut off no even with the controls turned off. very annoying. 70 degrees out windows down blower on full blast blowing heat. I found out today that the problem is the blower motor resistor. theres a "snap disc" on...- fz1nsho
- Post #12
- Forum: Gen 1 & 2 - Engine, Exhaust, Drive Line & AC syste
-
F
annoying clicking noise when heater/ac is on
mine did the same until the other day when the clicking quit and the blower didnt shut off no even with the controls turned off. very annoying. 70 degrees out windows down blower on full blast blowing heat. I found out today that the problem is the blower motor resistor. theres a "snap disc"...- fz1nsho
- Post #11
- Forum: Gen 1 & 2 - Engine, Exhaust, Drive Line & AC syste
-
F
I need new struts
Im going to replace all 4 struts. Where should i go? Im going to hold the stock stance but i want to get something worth while. 95 mtx. I'd like complete ready to bolt on without spending an arm and a leg. Let me know thanks guys- fz1nsho
- Thread
- Replies: 10
- Forum: Gen 1 & 2 - Suspension, Brakes & Body
-
F
Spits and sputters
Sorry for being a bump ass but what is a DIS module? I'm having a brain fart. Well I didnt do anything and it went away?- fz1nsho
- Post #4
- Forum: Gen 1 & 2 - Emergency Issues - Help & Maintenance
-
F
Spits and sputters
ok i ran the test about a week ago with the one that plugs in to the port. I got a couple codes. one was tps out of position and i had i new one at the house so i threw that in and the others were some thing like low voltage to two other things. and i did the running tist and that passed but i...- fz1nsho
- Post #2
- Forum: Gen 1 & 2 - Emergency Issues - Help & Maintenance
-
F
Spits and sputters
Ok about a month ago it started to miss. so i had new plugs and wires at the house so i threw them in. It ran great again!!! Well now (for about the last two weeks) it spits and sputters. Under acceleration you dont feel it that much but when your at a steady rpm it chugs. Now i've checked for...- fz1nsho
- Thread
- Replies: 4
- Forum: Gen 1 & 2 - Emergency Issues - Help & Maintenance
-
F
exhaust question
i'm thinking about ordering a dyno max cat back for my 95 mtx i found a deal on line for 255 + s+h is this a good deal and is it worth the money My other question is i have sho shop catless y's (not happy with the amount of torque lost) I'm also ordering dyno max high flow cats but i dont know...- fz1nsho
- Thread
- Replies: 2
- Forum: Gen 1 & 2 - Engine, Exhaust, Drive Line & AC syste
-
F
loss of power and burns rich
I replaced the plugs and still have the problem. I store the car over the winter so i'm goin to try everything that you guys think may be the problem. I've also replaced both o2 sensers, this kid i know has a ford computer so the next time i talk to him i will have him throw it on and i will let...- fz1nsho
- Post #11
- Forum: Gen 1 & 2 - Engine, Exhaust, Drive Line & AC syste
-
F
loss of power and burns rich
i have a 95 mtx with 85k. Iv had it for two and a half years. for the past year and a half its seems to have lost its balls. It started with when i went to start the car it wouldnt start on the first try. I'd turn the key back and turn it over again and it would fire up. :shrug: Now it burn...- fz1nsho
- Thread
- Replies: 14
- Forum: Gen 1 & 2 - Engine, Exhaust, Drive Line & AC syste
