LeddZepp8687
The Keg Rider
Man I want in on these but I need soemthing that will clear 13"s
LOOK..16x8 lightweight SHO rims!!!!
- Thread starter shomesomesho
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
K-Dawg
SHO Member
Me too. I can't give up these Cobra brakes.
shomesomesho
G-force addict
Going once, going twice . . ....
Well folks, due to lack of interest, there will be no group buy. We were short by 2 buyers, so maybe another time, in another place, in another age....:cry: :cry: :cry: :cry:
For now, I'll just have to live with the 17x8's
Well folks, due to lack of interest, there will be no group buy. We were short by 2 buyers, so maybe another time, in another place, in another age....:cry: :cry: :cry: :cry:
For now, I'll just have to live with the 17x8's
Last edited:
Shoaz
Studly dood
The Borbets are not a bad alternative...only a half-inch narrower at 16x7.5.
SubCool
New Member
I agree- im looking to upgrade my rims, and brakes. I am working on my brakes at the moment. I would LOVE a wider tire, i was just looking into it. And the Price on them shipped is Awesome. But- we need larger tires. See if we can get the same deal on 17 or something
. And more time~
SuperHO
Mental Patient
Hello, 7 month old thread.....welcome back.SubCool
New Member
Lol-
Ya- i never pay attention to the dates. I do searches, and just read- Eh-
Reviving the dead can help alot of times.
SuperHO
Mental Patient
Nothing like the guy who just revived the 4 year old thread...you no longer fail so hard.
sho_bc
Dragonboater
call me back in 7 months and I just well may buy a set of 5. 
stupid auto-x addiction. All depends on if I get posted somewhere close to auto-x events.
stupid auto-x addiction. All depends on if I get posted somewhere close to auto-x events.
Jonny Cash
Good boy
It never came through.
sho_bc
Dragonboater
I know that... but hopefully with the revival of this thread, the interested parties might still be interested, and then the thin strand I'm grasping onto might get a little bit thicker and stronger. 
shomesomesho
G-force addict
Anyone up for 17x10's w/ 295 tires?? 12mm offset, cut off the rear fenders . . . tires will stick out by about 2" . . .. boy I get goosebumps just thinking about it..
(Might have to sell a SHO just to afford it though.)
(Might have to sell a SHO just to afford it though.)
K-Dawg
SHO Member
I'm still down for a set of 17x8s in any of the solid colors (not black/polished). I have the chedder ready.
somedude_001
SHO Member
the thread was for 16X8's if you want 17X8's shonutperformance has your ticket
K-Dawg
SHO Member
Where's shonutperformance? They have 17x8" Rotas for the SHO?
Jonny Cash
Good boy
ditto. If you want to try this again Ill be down for a set.
sdpatt
Sr. SHO Engr.
I am using a 35 mm offset, 7.5" wide 16" wheel and with "wide for their size" 225/55-16 tires, I have needed to trim approximately 8-12 mm from the top and top front portions of the out fender lip on my '91. With the 16"x8" wheels, the 1/2" extra width and 2 mm less outward offset will place the outboard edge of the rim about 0.17" farther outward than my wheels. I suspect without going to the 245 mm section width tire that enough fender can be trimmed to maintain clearance from the tire. The 225 mm section width tires on my 7.5" wide wheels have looked wider than many "wider" tires I have seen mounted on SHOs. With 8" wheels, 225 mm section width tires would look even better and have better sidewall support.
I'm looking for a set of 7+" wide 16" track wheels.
I'm looking for a set of 7+" wide 16" track wheels.
Last edited:
Shoaz
Studly dood
Post #64
Similar threads
