GLSS Meet Toledo 7/30/11 (OFFICIAL!)

[93rev2sev]

Color?

 

[SHOracer14]

My bad... grey.

 

[Huntervf]

Definitely not able to make this one; I'm still knee deep in moving and work to even get to bed before midnight. Someone do a burnout for me

 

[93rev2sev]

I don't have one Jim, but I've always wanted to see about swapping a fold down rear seat in there. If I needed a rear seat, I'd be looking into a gen3 seat. It could probably be made to fit pretty easily.

 

[TimboSHO]

I don't have one Jim, but I've always wanted to see about swapping a fold down rear seat in there. If I needed a rear seat, I'd be looking into a gen3 seat. It could probably be made to fit pretty easily.

I've also thought about this, but never did any further digging. I was wondering if it would be possible to modify gen 1/2 seats to fold (since there was no black in gen 3). It shouldn't be too hard, but I have alot of other projects I'd like to do first!!

 

[typhoon5000]

I might not be able to make it, not sure yet. My SHO will def not make it. It's still broken (long story, but I trailered it around everywhere at the convention). There's also a vintage race weekend going on at Waterford Hills this weekend that I might go to. We'll see. What's the roll call so far?

 

[93rev2sev]

what happened to it now?

 

[SHOracer14]

I know I'm in! I'm sure Boat and Bubba, Bill Saunders, Chris Saunders?, Tom?

 

[93rev2sev]

Mostly together, I'll have my 90 there. It's mostly together, too.

 

[typhoon5000]

what happened to it now?

It's more or less what didn't happen to it. Basically my brake lines repairs were leaking at a almost every union and I simply ran out of time and energy to diagnose or reflare them. Plus, because I had no brakes, I couldn't take it to get aligned after rebuilding the front suspension. I also had the lower front ball joints on both sides pop out while the car was on the trailer and the grease fitting on the passenger side ruin my brand new TD 1.2 wheel by rubbing on it over bumps and putting a nice divet/groove/crater in it . Turns out, I didn't have them up far enough in the sleeve for the bolt to line up with the groove . Since this happened while it was on the Uhaul car hauler, I couldn't get a jack on those skinny ramps to repair it. So I had to drive it off the trailer like that, cause the wheels to tuck into the front bumper and I'm pretty sure I bent something in the rack. It's just a mess.

Sorry for the hi-jack, but you asked...

 

[SHOracer14]

Tom... I can't wait to see the 90'! I'm sure as long as he's not up to anything else Old Man Perry might make an appearance as well?

 

[SHObill]

Jim, we will not be able to make your meet. sorry! too many reasons, like Pauline's BD Fri. & its a big one, & I do not have a car I feel I can drive outside the city, not to mention one with AC & insurance is a problem too.

 

[93rev2sev]

I don't think the 90 will be up for a long drive (still planning to drive to catawba island?) but It'll definitely make an appearance.

 

[SHOracer14]

I don't think the 90 will be up for a long drive (still planning to drive to catawba island?) but It'll definitely make an appearance.

It's cool you can always hitch a ride in the Diesel SHO (mine).

 

[SHOracer14]

Anyways... everyone who's coming shout out!
Sounds like the only confirmations so far
Me
Tom
Boat
Bubba

 

[boat]

Just talked to Bubba, he might not be coming. Due to not being able to find a sitter for the boy, who now hates road trips with an extreme passion.

 

[typhoon5000]

Alright, I'll be coming. I'll just be driving my truck.

 

[93rev2sev]

An F350 will always be welcome at SHO meets....lol.

 

[typhoon5000]

Looks like I'll be driving Tom's '93 instead

 

[boat]

What time and what is the address of where we are meeting?