Turbonetics Turbo, 550cc injectors, bored rails, boost controller..Etc...

[adidas_kn]

Alright guys I no longer feel like turboing a FWD car and blowing through transmissions so here's what I have for sale. Pix to come later. Prices do not include shipping.

Brand new Turbonetics GT-k650 ceramic coated ball bearing, 3" V-band turbo. The ultimate power making streetable turbo for the SHO. $1450 obo
6 Deatschwerks 550cc matched injectors made for the SHO $350
Brand New AEM Tru Boost boost controller/gauge all in 1. $250
1 pair of bored fuel rails for above injectors $75 obo
Misc SS T-bolt clamps for 2.5"-4" tubing make offers.
4" id 90degree blue silicone tube for turbo inlet. $20
2.5" to 3" 45degree adaptor elbow from FMIC to Throttle body. $20
Windowed 3.0L upper timing belt cover, painted gloss black but might need repainted due to hairline cracking $30
90-92 rear calipers rusty but complete. $25

-- means spoken for
More parts too but for got what I got. Need to dig through the garage.


Jerimie

 

[sho2see]

bump for some sweet parts

 

[adidas_kn]

The following items have been spoken for. If they become available again I will post it up.

MAF, Engine, Tranny case halfs and diff, cams, ECU etc..

 

[SHO_DOODmorrris]

Pics of Intercooler? i might be interested. also the AEM boost controller but i cant afford 265 LMK

-M

 

[adidas_kn]

Seriously? Nobody want the Turbo hot pipes? I keep seeing people begging Toolman to make another run of them. If you're awe'd by the price then go review the original groupbuy. The Sterling ceramic coating is almost needed in this application.

 

[cRaZySHO.]

Bump for the the best decision I think I have seen on this site lol.

 

[SASHO91]

Those cams will not stop calling my name..... AHHHHHHHH!!!!!!1111


We'll see.

 

[SeanMc]

Alright guys I no longer feel like turboing a FWD car and blowing through transmissions so here's what I have for sale. Pix to come later. Prices do not include shipping.

Brand new Ceramic coated Turbo Hot pipes from Tim the "Toolman" Tyner. $600 obo
--Brand new SHO Shop Stage 1 cams with dry film coating. $500 obo
Brand new 90mm lightning MAF with aluminum adaptor and proper wire adaptor$95
Brand new Turbonetics GT-k650 ceramic coated ball bearing, 3" V-band turbo. The ultimate power making streetable turbo for the SHO. $1450 obo
Brand new Tial 44mm Billet V-band wastegate with 14 psi spring $275
New Turbonetics Godzilla Monster Recirc/BOV, needs pipe adapter ****** cause I lost it somewhere between here and italy(can be bought online). $250
Same sided inlet outlet 2.5"in/out 18x6x3.5"(core size) X02 Racing FMIC $125 obo
6 Deatschwerks 550cc matched injectors $350
1 pair of bored fuel rails for above injectors $75 obo
Brand new AEM TRU boost guage/controller combo in 1 guage. $265
Misc SS T-bolt clamps for 2.5"-4" tubing make offers.
4" id 90degree blue silicone tube for turbo inlet. $20
2.5" to 3" 45degree adaptor elbow from FMIC to Throttle body. $20
X2J ECU $35
--Aluminum sub-frame bushings $70
--Windowed 3.0L cam sprocket cover, painted gloss black but might need repainted due to hairline cracking $25
90-92 rear calipers rusty but complete. $25
--Undamaged MTX-IV case halfs and good stock diff. Great for somebody who has a damaged tranny. Make reasonable offer.

Fresh 3.2L Low compression Shortblock(no heads) with 8.5:1 Wiseco pistons new bearings, gaskets and seals. Block painted high temp ford blue. Block and bottom end were from my 10k mile 3.0L Bondurant motor. Never ran since build. Oil pan sealed up as it should be. Entire engine has been celephane wrapped since built. $1100 obo

-- means spoken for
More parts too but for got what I got. Need to dig through the garage.

Going to go with a 2.1L Blowzilla intercooled Kenne Bell kit for my Custom Bullitt. RWD>FWD. Lol. Going to put a built HC 3.3L with cams and such in my 93' for a track attack toy.

Jerimie

Not to whore your thread, but I'd stay away from KB, they like to shred their internals. A friend of mine owns a Mustang performance shop, and has rebuilt multiple engines due to this. Go with a whipple.

 

[SASHO91]

Plus the Whipple sounds better... /*******

 

[adidas_kn]

Never seen a Whipple setup on a 99-04 4.6L 2V engine. I know they make em for the 4v cobra motors though. I'm getting the full kit with lotsa extra with only 3k miles on it for $4k to my door. Going to get it dyno tuned and regeared to 3.55's from my current 4.10's.

Somebody buy my parts! I need $$

 

[kikkinasphalt]

tooo soon junior too soon.



if it were closer to the end of the year.. id be a happy camper

 

[SeanMc]

Never seen a Whipple setup on a 99-04 4.6L 2V engine. I know they make em for the 4v cobra motors though. I'm getting the full kit with lotsa extra with only 3k miles on it for $4k to my door. Going to get it dyno tuned and regeared to 3.55's from my current 4.10's.

Somebody buy my parts! I need $$

Then go with a vortech or a Novi

 

[Troywakeling]

Ive seen a whipple on a GTP, my god......

 

[ycode90]

Mmmmmm me want cams. But alas no cash.

 

[SHO_DOODmorrris]

PM sent

 

[SHOMurph]

bump for mucho parts!

Murph can't WAIT to run Mustang with that thingy on top of motor. :O

 

[adidas_kn]

I know I won't win in the long run but maybe for the first 60' Lol! My burnouts will look cooler also.

 

[adidas_kn]

I still can't believe nobody wants these damn hotpipes. Make me a good offer.

 

[SASHO91]

Do the cams come with anything?

 

[SHO_DOODmorrris]

I still can't believe nobody wants these damn hotpipes. Make me a good offer.

hey dude i want them but im on an uber strict budget so i am forced to make my own!