>>>>>> Tech Meet <<<<<<

[Troubled93]

Why feel bad? We are all here to help each other. I have never done rod bearings but I know Joe has and i'm not sure how long it takes. But we have all summer right?

to a point i have all summer lol this thing is my one and only DD and the sooner the better... as soon as i buy the RB kit i will re post if anyone is willing to help or just do it for a labor fee...

 

[dmoo21]

rod bearings are not to hard. the hardest part is getting the y-pipe off. thoses studs on the exhaust mani's are always terrible,

this is the truth,

you get the Y pipe off without ruining something. and im sure people would help you do the bearings. id have to look up the procedure but its pretty much a swap out of parts with lots of oil dripping everywhere

 

[dodgebusta]

i'll be work until 430 so let me know of anybody need lock tite or anything random. I can usually pick up a lot of stuff at work for repairs. Not specific parts but general like lock tite, random nuts and bolts.

 

[Vnuk1]

I have the whole write up from the Phoenix Project copied if you want to attempt the Rod Bearings.

 

[Troubled93]

yeah do u have it pdf or can u email it? if so [email protected]

 

[Vnuk1]

No I have printed out in a Binder at home.

 

[Troubled93]

well i can just pick it up on the 25th then... i dont have anything to work on but would like to meet n greet and socialize and learn some stuff from everyone else...

 

[Vnuk1]

Or you can just print it out from the email I sent you.

 

[stensg]

joe i might come down of this to but only if the sho is running anyone got a cheery picker a welder and a grinder close by i got my solid motor mounts made up just need to do the tranny lol if i do come is it ok if megan comes with?

 

[whiteman_01]

Ive got a cherry picker, and a grinder. I bet if i ask my neighbor we could use his welder.

 

[dodgebusta]

curious if anybody would be up for uni ave in st paul after we start loosing light?

 

[whiteman_01]

i have lights in the garage too. :wave:

 

[stensg]

not going to make this guys got bills to pay got 2000 today and -400 after paying bills hope to make the next one

 

[whiteman_01]

Ok, can i get an official count on whos coming. Just need to know how much food to pick up.

So far i have....


Tyler
Dan M.
Matt
Troubled93 (justan?) + 1
JC
Frankenstein

 

[Vnuk1]

Correct And I'll bring a Taco Salad.

 

[Troubled93]

I'll be there +1 (my brother) I will bring a Ranch & Bacon Pasta salad and some beer... Mich Golden Draft Light good with everyone here????

 

[Troubled93]

since everyone is gonna be replacing window motors lol is there anyone who is coming that might want to give me a 2nd opinion or some help on my moonroof glass... for some reason its not seating properly and is causing major wind noise on the high and a minor water leak...

 

[dodgebusta]

since everyone is gonna be replacing window motors lol is there anyone who is coming that might want to give me a 2nd opinion or some help on my moonroof glass... for some reason its not seating properly and is causing major wind noise on the high and a minor water leak...

see Joe on this, he had **** of a time with this on his green one if i remember right.

 

[dodgebusta]

Ok, can i get an official count on whos coming. Just need to know how much food to pick up.

So far i have....


Tyler
Dan M.
Matt
Troubled93 (justan?)

jeez not including me, i'll be there around 5pm or so, lol, just in time for food :woo-hoo:

 

[sho'noffmtx]

im thinking about it but time will tell.:wave: